Search results for '2012'
-
Bus/Freightliner solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a pair of pin mounts, a1/4" NPT flange for an expansion tube, and four 1/4" NC threaded blockson the grill side of the tank.
Bottom Tank
This tank as oil cooler holes @ 18" centers, a 2" diameter hoseconnection, a 1/4" NPT flange for a drain, a pair of pin mounts, andfour 1/4" NC threaded nuts along the grill side of the tank.
Note: same as tanks #2014CK but 2" longer.
Learn More -
Fire Truck bolt-on complete set
Top Tank - #092012A
A 2 1/4" hose connection 9" from the edge of the tank to the edge of the hose connection that comes out the top and angles 90o towards the engine, three 1/4" NPT flanges on the surge tank, and a 1" diameter hose connection angled downwards below the surge tank.
Bottom Tank - #092012B
A 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the bottom for a drain fitting, and oil cooler holes @ 18" centers.
Side Frames - #092012C (left) and D (right)
HDR: 7 1/4" x 7" - 6 BH - 39 5/8" tall.
Two 1/2" NC and two 1/4" NC threaded holes along the back, three 1/4" NC threaded holes along the edge on the engine side, four 1/4" NC threaded holes along the edge on the grill side.
Bolt pattern matches tank #748.
Learn More -
Generator solder-on tank set
These tanks have a 2 1/4" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, and a mounting bracket on each end with two 5/16" NC threaded holes (to attach side frames).
The top tank has a 1 1/4" hole for a filler neck, and a 3/8" NPT flange near the hose connection. The bottom tank has a pair of 1/4" NPT flanges for drain fittings.
John Deere Generator application.
Learn More -
Solder-on complete set
Top and bottom tanks are mirror images of each other. Each tank has a 1 1/4" NPT coupling, and a 3/8" NPT coupling. Made of 1/8" thick steel, and have square corners.
Frames are 51 13/16" in length, by 5 1/4" wide. One frame is blank, and the other has five 5/15" NC mounting nuts along each side.
Learn More