#072012A - HDR: 29 3/4" x 2 1/2"

Generator solder-on tank set

These tanks have a 2 1/4" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, and a mounting bracket on each end with two 5/16" NC threaded holes (to attach side frames).
The top tank has a 1 1/4" hole for a filler neck, and a 3/8" NPT flange near the hose connection.  The bottom tank has a pair of 1/4" NPT flanges for drain fittings.

John Deere Generator application.