Search results for 'surge tank'
-
AutoCar bottom tankThis is a four pass system. The tank has two baffles, a 1 1/4" diameter hose connection on the driver's side on a 90
o angle and facing slightly downward, a 1 1/4" diameterhose connection on the passenger side 2" long coming straightout, three 1/4" NPT flanges, and two 5/8" NC mounting studs @ 8" centers.
Learn More
-
AutoCar bottom tankSame as tank #510-1 except with a baffle splittingthe radiator left to right.
Learn More
-
AutoCar bottom tankThis tank has a 1 1/4" diameter hose connection on the passenger side straight out tothe engine, a baffle 13 1/16" in from the passenger side, two 1/4" NPT flanges, and two 5/8" NC threadedstuds 2 3/4" long @ 8" centers.
Learn More
-
AutoCar bottom tankThis tank has two flush mounting bolt-on flanges with four 1/2" NC bolt holes, and two mounting studs 2 3/4" longwith 5/8" NF threads at 8" centers.
Note: similar to tank #510-1, but wider, and with a different bolt hole pattern. Learn More
-
Freightliner / Sterling solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, two sleeves for mounting bolts, a 1/4" NPT flange on the top of the tank (for a 90o hose barb), eight 5/16" NPT threaded blocks, and two 5/16" NC nuts in the top of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two sleeves for mounting bolts, a 1/2" NPT flange (for a drain cock), eight 1/4" NPT threaded blocks, and two holes @ 12" centers to accommodate an oil cooler (to be supplied by the customer). Hose conn. 7 1/2" from end to center
Note: this tank set is used with a Mercedes engine. (matches brass kit #9414)
(Same set with O/C holes is #2007CK-O/C.)
|
|
|
Learn More
-
Freightliner Sterling solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the hose connection, a sleeve for a mounting bolt on each end of the tank, four 5/16" NC threaded blocks on each side, a 1/4" NPT flange for a 90
o hose barb, and a pair of 5/16" nuts on the top.
Bottom Tank
This tank is similar to the top tank, except the 2 1/2" diameter hose connection is 7 1/2" from the edge of the tank to the center of the hose connection.
Matches brass kit #9413.
Used with a Detroit Diesel engine.
Same kit with O/C holes is #2006CK-O/C.
Learn More
-
Solder-on tank set
Top Tank
This tank has a 1 1/4" diameter hose connection, a 1 1/4" diameter hole in the top center of the tank for a filler neck, and a 1/2" NPT flange.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and a channel welded to the bottom of the tank for mounting purposes.
Learn More
-
MCI Bus top tank
This tank has a 2" diameter hose connection, and two 3/8" NPT flanges for expansion fittings.
Pairs with bottom tank #061510B, and washer bar #061510C.
Learn More
-
New Holland L180 Skid Steer solder-on set
These tanks have 1 3/4" diameter hose connections, two 3/8" NC threaded nuts, and two "ears" on the end of the tank to mount an oil cooler. The top tank has a hole for a filler neck and a lifting lug, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More
-
Cat / Case / John Deere solder on tank set
(both tanks are identical)
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the pipe, a 3/8" NPT coupling for a drain or expansion fitting, and two mounting bolt sleeves for 3/8" diameter bolts @16 5/8" centers.
Learn More
