Freightliner / Sterling solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, two sleeves for mounting bolts, a 1/4" NPT flange on the top of the tank (for a 90o hose barb), eight 5/16" NPT threaded blocks, and two 5/16" NC nuts in the top of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two sleeves for mounting bolts, a 1/2" NPT flange (for a drain cock), eight 1/4" NPT threaded blocks, and two holes @ 12" centers to accommodate an oil cooler (to be supplied by the customer). Hose conn. 7 1/2" from end to center
Note: this tank set is used with a Mercedes engine. (matches brass kit #9414)
(Same set with O/C holes is #2007CK-O/C.)
|
|
