Search results for '10" oil cooler'
-
Freightliner Solder on Complete
Core 24" x 26" x 2 1/4", 3 row, RT core, hose connections 2" top left, 3" btm right, with frame and oil cooler - 18" centers
Learn More
-
Thomas Bottom Tank
Tank has a 2" dia. hose connection - 3 3/4" from end to center of conn.,a 1/4" NPT fitting end of tank for drain, a 3/8" dia. expansion tube. This tanks accommodates a 16 plate 10" center oil cooler not included
Learn More
-
AutoCar top tankOne baffle 7/16" off center of tank. Two 1/4" NPTflanges on top - 10" in from each end.
Note: pairs with tank#517LF bottom tank ( 4 pass system) Learn More
-
Freightliner / Sterling solder-on tank set
Top Tank This tank has a 2 1/2" diameter hose connection, two sleeves for mounting bolts, a 1/4" NPT flange on the top of the tank (for a 90o hose barb), eight 5/16" NPT threaded blocks, and two 5/16" NC nuts in the top of the tank. Bottom Tank This tank has a 2 1/2" diameter hose connection, two sleeves for mounting bolts, a 1/2" NPT flange (for a drain cock), eight 1/4" NPT threaded blocks, and two holes @ 12" centers to accommodate an oil cooler (to be supplied by the customer). Hose conn. 7 1/2" from end to center
Note: this tank set is used with a Mercedes engine. (matches brass kit #9414)
(Same set with O/C holes is #2007CK-O/C.) | |
|
Learn More
-
New Holland L180 Skid Steer solder-on set
These tanks have 1 3/4" diameter hose connections, two 3/8" NC threaded nuts, and two "ears" on the end of the tank to mount an oil cooler. The top tank has a hole for a filler neck and a lifting lug, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More
-
Kenworth side frameTop and bottom flanges have 12 bolt holes each. There is a "Z" bracket, two "ear" brackets and 2 keyhole brackets for mounting a charge air cooler
.
NOTE: Frames are not interchangeable. Order left or right accordingly. (right frame shown here)
Learn More
-
NPT to SAE adapter
This adapter facilitates connecting newer style SAE lines to the traditional style NPT oil coolers.
3/4" NPT to 3/4" SAE 12
Learn More
-
Toyota solder-on tank kit
These tanks have 1 3/8" diameter hose connections, the right side tank has a stand pipe for a filler neck and oil cooler holes spaced @ 10 3/4" center to center, and both tanks have steel mounting brackets that cover most of the tank. Individual tanks #4111X and #4112X.
Learn More
-
Nissan solder-on tank kit
These tanks have 1 1/4" hose connections and steel mounting brackets, and the left side tank has a stand pipe for a filler neck and oil cooler holes spaced @ 7 3/4" center to center. Individual tanks #4218B and #4219B.
Learn More
-
Toyota solder-on tank kit
These tanks have 1 1/2" diameterhose connections. The top tank has a hole for a filler neck,the bottom tank has holes for an oil cooler spaced @ 10 7/8", and thereare various brackets for mounting. Individual tanks #3099 (top) and #4100A (btm).
Learn More