Search results for 'CAT'
-
3 row, 28 1/4 x 17 - yrs. 68 - 90, El Camino 75 - 77, Grand Am 73 - 75, Regal 73 - 77, Blazer/Jimmy 73 - 80, CK 73 - 80, P series 73 - 80, Suburban 73 - 80, Grand Prix 74 - 77, Bonneville 74 - 81, Catlaina 74 - 81, Delta 74 - 85, G Van 72 - 80, Laguna 75 - 76, Centurion 73, Malibu 74 - 77, Seville 80 -82, Toronado 80 -85, Cutler Cruiser 81, Custom Cruiser 74 - 91, Deville 74 - 77, Century 73 - 76, Belvedere 70, Monte Carlo 72 - 77, Fleetwood/ Brgm 70 -74, Eldorado 70 - 82, Biscayne 71 - 72, Brookwodd 71 - 72, Kingswood 71 - 72, Bel Air, 71 -74, Cutlaass Supreme 72 - 77, Calais 68 - 74, Estate Wagon 71 - 79, Lemans 72 - 77, Cutlass 72 - 77, Chevelle 72 -73, Skylark 72, Lesabre 71 - 90, Caprice 71 -90, Riveria 71 - 85, Electra 71 -84, Impala 71 - 79 Discontinued, limited stock Learn More
-
Cat / Case / John Deere solder on tank set
(both tanks are identical)
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the pipe, a 3/8" NPT coupling for a drain or expansion fitting, and two mounting bolt sleeves for 3/8" diameter bolts @16 5/8" centers.
Learn More -
Hdr: 50 x 13, 2 bolt on flanges, each 3" dia., 1 - 1/4" NPT fitting in center
Learn More -
Cat side rails L&R, 45", 12" channel width, rails are not interchangeable also come in 51" length Learn More
-
Bottom tank hdr: 50 x 9, 1 mtg flange, 2 brkts Learn More
-
Cat Solder-On set
Top Tank
This tank has a 2" diameter hose connection, a 1 3/8" diameter hole in the top center for a fill neck, and two 5/16" NC threaded holes at each end to attach side frames.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain, two 5/16" NC threaded holes at each end to attach side frames, and a 3/4" diameter bypass hose connection.
Learn More -
Cat Solder-On set
Top Tank
This tank has a 2" diameter hose connection 7 3/4" from the edge of the tank to the center of the hose connection, a 1/2" NPT flange for a sight glass, four 5/16" NC mounting nuts to attach side frames, and a diffusion baffle.
Bottom Tank
This tank has a 2 1/4" diameter hose connection 3 3/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a drain cock, and four 5/16" NC mounting nuts to attach side frames.
Learn More -
Cat solder-on set
Top Tank
This tank has a 2" diameter hose connection 4 3/4" from the edge of the tank to the center of the hose connection, a 1 3/8" diameter hole in the top center to accommodate a filler neck, and two 5/16" NC threaded holes on each end of the tank to attach side frames.
Bottom Tank
This tank is the same as the top tank, except instead of a filler neck hole it has a 1/4" NPT flange for a drain cock on the engine side of the tank.
Note: this tank set matches the brass tank set #9714.
Learn More -
Bus solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a pair of pin mounts, a1/4" NPT flange for an expansion tube, and four 1/4" NC threaded blockson the grill side of the tank.
Bottom Tank
This tank as oil cooler holes @ 18" centers, a 2" diameter hoseconnection, a 1/4" NPT flange for a drain, a pair of pin mounts, andfour 1/4" NC threaded nuts along the grill side of the tank.
Note: also has Ford Sterling applications.
Learn More -
Universal hose connection
This hose connection is 2 1/2" in diameter, and is shaped in an "S" curve. Can be used in applications in which a replacement radiator does not perfectly align to the existing rad hose.
Learn More