Details
Cat solder-on set
Top Tank
This tank has a 2" diameter hose connection 4 3/4" from the edge of the tank to the center of the hose connection, a 1 3/8" diameter hole in the top center to accommodate a filler neck, and two 5/16" NC threaded holes on each end of the tank to attach side frames.
Bottom Tank
This tank is the same as the top tank, except instead of a filler neck hole it has a 1/4" NPT flange for a drain cock on the engine side of the tank.
Note: this tank set matches the brass tank set #9714.