Search results for 'CAT'
-
Cat top tank
This tank has a bolt-up type flange with four 3/8" NC threaded holes, located in the center of the tank, to accommodate a 2 1/2" diameter hose connection. There are threaded bars welded along the header, each with four 3/8" threaded holes, a 1/4" NPT flange to accommodate a sensor, a raised filler neck hole in the top center of the tank, a large opening with a threaded stud in the center (typical Cat filler assembly), and a threaded bung on each end each with 5/8" NC threaded holes (for lifting the radiator).
Note: for this tank, a sample must be supplied by the customer.
Learn More -
Cat solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1 3/4" diameter hole for a filler neck, a 1/4" NPT flange for an expansion fitting, and and indent on each end.
Bottom Tank
This tank has a 2 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
-
Komatsu Dozer tank set
Top Tank
This tank has a 2" diameter hose connection, a 1/2" NC nut for a lifting lug, and a hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, two 1/2" NPT flanges for drain fittings, and a plate cooler to be supplied by the customer.
Note: a 1010PC plate cooler can be provided if necessary but the connections will be 3/4" NPT fittings instead of the bolt-on style flanges of the original. This will necessitate modification of the lines on the vehicle.
Or we can RE/RE your old cooler into the new tank.
Call for pricing and details.
Learn More -
Cat side frame
This frame has six 5/16" NC threaded nuts along the back of the frame for mounting the shroud.
Used in conjunction with mounting bracket #080310B, and bottom tank #100209A.
Learn More -
Cat frame assembly
This bottom mounting assembly goes with bottom tank #100209A. There are two 1/2" NC threaded blocks @ 30 1/4" centers for mounting.
Learn More -
Generator solder-on tank set
These tanks have a 2 1/4" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, and a mounting bracket on each end with two 5/16" NC threaded holes (to attach side frames).
The top tank has a 1 1/4" hole for a filler neck, and a 3/8" NPT flange near the hose connection. The bottom tank has a pair of 1/4" NPT flanges for drain fittings.
John Deere Generator application.
Learn More -
Cat solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a filler neck hole in the top center of the tank.
Bottom Tank
This hole had a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More -
-
Cat solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, two lifting brackets on the top of the tank, a 1 1/4" hole on the top for a filler neck, and two threaded mounting nuts on the backside of the tank.
Bottom Tank
This tank has a 2" diameter hose connection, two mounting pins on the bottom of the tank, and a 1/4" NPT flange for a drain cock.
Sample required Learn More