Search results for '720'
-
Peterbilt side frame
Top flange has 11 bolt holes drilled clearance for5/16" bolts. Bottom flange has 8 bolt holes drilledclearance for 5/16" bolts. One angle mount on grilleside. Various other holes for brackets, etc.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side or pairs. Learn More -
Peterbilt side frame
Same as model #720 except shorter.
Note: frames are not interchangeable. Order left fordrivers side or right for passengers side of pairs Learn More -
John Deere solder-on kit
These tanks have 2 1/4" diameter hose connections, and one tank has a steel bracket on the back.
Individual tanks #3070 and #3071.
Learn More -
John Deere mounting bracket
This bracket is designed tofit over the bottom tank of brass kit #9700 (tank #3047), or the bottomtank of the corresponding steel kit #080808A.
There are six 3/8"NC threaded mounting holes, eight 3/8" clearance holes, a cut-out forthe hose connection, and a cut-out to access the drain cock. Learn More -
Isuzu "UD" solder-on tank set
These tanks have 1 7/8" diameter hose connections. The top tank has a 5/16" NC threaded nut on each end to attach side frames, a 18mm x 1.5 flange for a sensor fitting, and a hole for a filler neck. The bottom tank has a a 1/4" NPT flange for a drain fitting, and a pair of mounting pins.
Learn More -
Generator solder-on tank set
These tanks have a 2 1/4" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, and a mounting bracket on each end with two 5/16" NC threaded holes (to attach side frames).
The top tank has a 1 1/4" hole for a filler neck, and a 3/8" NPT flange near the hose connection. The bottom tank has a pair of 1/4" NPT flanges for drain fittings.
John Deere Generator application.
Learn More