Bolt On Tanks
-
Western Star washer bar
This washer bar belongs with tank #5093.
40" long, 1" wide, 1/4" thick.
21 BH (bolt holes)
For use with OE frames only.
Learn More -
Western Star threaded washer bar
This threaded bar belongs with tank #5093. Four 5/16" threaded holes. 6 5/8" long, 7/8" wide, 3/8" thick.
For use with OE frames only.
Learn More -
Western Star cross bars
These cross bars are 44" long with 3/8" NC threads on each end.
Goes with #509 and #5091 tank set.
Learn More -
Western Star top tank
This tank has two bolt-on flanges with four 3/8" NF threadedholes in each, a bolt-on flange with two 3/8" NFthreaded holes, two 1/4" NPT and one 3/8" NPT flange facing the engine, a 1 3/4" hole on top for a fillerneck, a bolt-on flange in the baffle with four 5/16"NC threaded holes, and nineteen 5/16" NC threadedmounting holes in the baffle. The tank is lower on the passenger side to accommodate aCAC hose. Learn More -
Western Star top tank
This tank is the same as tank #498, but with out the CAC cut-out and one less1/4" NPT flange facing the engine. Learn More -
Western Star top tank
This tank has three bolt-on type flange connections, a 1/4"NPT and a 3/8" NPT flange, a 1 1/4"hole on top for the solder on cap, and a bolt-on type flangein the built-in baffle. This tank is similar to tank #499, but with slightly different header dimensions and bolt pattern.
NOTE: filler neck or caps not available. Learn More -
Western Star top tank
This tank has a 2 1/2" diameter hose connection, a bolt-on type flangeon the front and rear of the tank, a 3/8" NPT flange, two 1/4" NPT and two 1/8" NPT flanges, and a bolt-on type flange in the built-in baffle.
Note: filler necks or caps not available. Learn More -
Western Star top tank
This tank is the same as tank #501 except that it has two 2 1/2" diameter hoseconnections @ 14" centers. Learn More -
Western Star top tank
This tank has two bolt-on type flanges with four 3/8" NC threadedholes, two 1/8"NPT a 3/8" NPT and a 1/2" NPT flange, a bolt-on flange with two 3/8" NC threaded holeson the top of the tank, a 1 1/4" hole on top for filler neck, a1/2" NPT flange and one bolt-on type flange withtwo 3/8" NC threaded holes on the grill side, and a bolt-ontype flange with four 5/16" NC threaded holes inthe baffle on the passenger's side. Learn More -
Western Star hose connection
This hose connection is built for the bolt-on flanges of tank #503. The connection is 2 1/2" diameter, and is 2" long.
Learn More