Top Tank
-
Solder-on Top Tank
This tank has a 1 1/16" diameter hose connection, a 1/2" NPT flange for a low coolant sensor, a hole in the top center of the tank for a filler neck, and a de-aeration baffle.
Learn More -
Solder-on Top Tank
This tank has a 1 3/4" diameter hose connection, and a stand pipe for a filler neck.
Learn More -
Bus solder-on top tank
This Bus top tank has a 1/4" NPT flange, and four 5/16" NC threaded studs facing the engine.
Learn More -
Gen Set solder-on top tank
This tank has a 1 3/4" diameter hole for a fill neck, a pair of 1 3/4" diameter hose connections, and a deflection baffle.
Learn More -
Case solder-on top tank
This tank has a 2 1/2" diameter hose connection, a 1/2" NPT flange to accommodate a sight glass, and a pair of mounting brackets (one on each end).
This tank matches with bottom tank #071012A.
Learn More -
Hyster Lift Truck solder-on top tank
This top tank has a 1 3/8" diameter hole for the fill neck in the topcenter of the tank, a 1/8" NPT flange for an expansion fitting,and a 1 1/4" diameter hose connection at one end of the tank anglingupward. Learn More -
John Deere top tank
This tank has a 2" diameter hose connection that angles downward, and a stand pipe to accommodate a filler neck.
Learn More -
Solder-on top tank
This tank has a pair of 1 5/8" diameter hose connections 2 7/8" in from the edges of the tank to the center of the hose connections, a pair of 1/4" NPT flanges, a 1" diameter heater bypass in the center of the tank, and a 1 3/4" diameter fill neck hole in the top center of the tank. Learn More -
Lincoln welder solder on top tank
Header: 3 1/4" x 19 7/8"
This tank has a 1 1/2" diameter hose connection, and a stand pipe for the filler neck.
Learn More -
Gen Set solder-on top tank
This tank has a 1 5/8" diameter hose connection, and a 1 1/4" diameter hole for a filler neck.
Learn More