Top, Btm, Frame, Shroud
-
Banded Woodchipper complete set
Top Tank
This tank has six 1/4" NPT flanges, a deairation baffle, a 2" diameter hose connection, a 3/4" diameter bypass hose, and a hole for a filler neck.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and two 5/8" mounting studs@ 6 7/8" centers.
Side Frames
These frames are 5" wide by 33 1/2" long. There is an inner channel, six 5/16" NC threaded nuts along the back of the frame, a bracket for mounting, an a 1" diameter hole for lifting.
Learn More -
Crane solder-on complete set
Top
Top tank is 3" deep with a 2 1/2" hose connection 10" from the edge of the tank to the center of the hose connection. A 5" tall pipe at the top-right of the tank accommodates the truck style filler neck.
Bottom
Bottom tank is 2" deep with a 2 1/2" hose connection, and a pair of 1/2" NC threaded studs for mounting.
Side Frames
The frames are 30 1/2" tall, each with 3 @ 3/8" NC threaded nuts to accommodate mounting of the shroud.
Shroud
The shroud has a 27" diameter hole for the fan, and has 3 @ 7/16" slotted holes along each side for mounting the shroud onto the frames.
Learn More -
Stationary Unit solder-on complete set
Top Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a 1 1/2" diameter stand pipe for a fill neck.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and two 3/8" NC threaded holes @ 14" centers for mounting.
Frames
These frames are 30" high, with three 5/16" NC threaded holes along the back for mounting.
Shroud
Three slotted holes along each side for attaching frames, four 5/16" NC threaded holes to attach finger guard, and a 22 1/8" diameter hole in the center.
Learn More -
1916 Waterloo Boy tractor solder-on
Antique restoration job - samples are required to repeat this job.
Learn More