Top, Btm and Frames
-
Gen Set solder-on tank set
Top Tank
This tank has two 1 1/2" diameter hose connections, and a 2" diameter stand pipe for a fill neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
These frames are 31" long, and have a bracket on the back with 3 slotted holes for mounting.
Learn More -
Gen Set solder-on complete set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and a 1/2" NPT flange.
Side Frames
These frames are 27 1/2" high, and have three 5/16" NC threaded holes along the back.
Learn More -
Motor Coach solder on complete set
Top Tank
This tank has two 2 1/4" diameter hose connections with a baffle separating them, a 1" NPT flange for a sight glass, a 1/4" NPT flange, and a mounting bracket.
Bottom Tank
This tank has a 1/4" NPT flange for a drain fitting, a 1418PC plate oil cooler (replaces the original aluminum cooler), and a mounting bracket.
Side Frames
These frames have eight 5/16" NC threaded nuts along the back.
Note: side frames have been modified from the original to be welded directly onto the tanks.
Learn More -
Gen Set solder-on complete set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 1 3/4" diameter hole for a filler neck, and a 1/2" NPT flange.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, and a 1/2" NPT flange.
Side Frames
These frames have four 5/16" NC threaded holes along the back.
Learn More -
1916 Waterloo Boy tractor solder-on
Antique restoration job - samples are required to repeat this job.
Learn More -
Gen Set solder-on complete set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1 3/8" diameter hole for a fill neck.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Frames
Simple channels 22" long by 4 1/4" wide.
Learn More -
Gen Set complete solder-on set
Top Tank
This tank has a 10" long 2 1/2" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a threaded bar on the grill side.
Bottom Tank
This tank has a 10" long 3" diameter hose connection, a 1/2" NPT flange for a drain fitting, and four 1/2" NC threaded mounting nuts.
Side Frames
One frame has six 3/8" slotted holes along each end for mounting, and the other frame has an angle with six 3/8" slotted holes for mounting.
Learn More -
Gen Set solder-on tank set
Top Tank
This tank has a 1" diameter hose connection, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 1" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
These frames have three 5/16" NC nuts along the grill side, and three 5/16" NC nuts along the back.
Learn More -
Gen Set solder-on complete set
Top Tank
This tank has a 1 1/2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/2" NPT flange for a drain fitting.
Side Frames
These frames are 23" long, with an angle bracket along the back.
Learn More -
Complete tank set
Top Tank
This tank has two 2 1/4" diameter hose connections, a bracket with slotted holes for mounting, a 1/4" NPT flange for an expansion fitting, and there is a baffle in the center of the tank between the hose connections.
Bottom Tank
This is a blank tank.
Side Frames
These frames are 42 1/2" long by 5" wide. One channel is plain, and the other has three 5/16" threaded nuts along the back.
Note: original unit was all aluminum construction.
Learn More