Top, Btm and Frames
-
Gen Set solder-on complete set
Top Tank
This tank has a 2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
These frames are 37 11/16" in length, and have four 3/8" NC threaded holes along each edge.
Learn More -
Solder-on complete set
Top and bottom tanks are mirror images of each other. Each tank has a 1 1/4" NPT coupling, and a 3/8" NPT coupling. Made of 1/8" thick steel, and have square corners.
Frames are 51 13/16" in length, by 5 1/4" wide. One frame is blank, and the other has five 5/15" NC mounting nuts along each side.
Learn More -
Gen Set solder-on complete set
Top Tank
This tank has a 1 1/2" diameter hose connection, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
Plain channels.
Learn More -
Kubota Mine Cat solder-on complete set
Top Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, four 8mm x 1.25mm threaded holes to attach side frames, and two mounting blocks @ 14 1/2" centers each with a 10mm x 1.25mm threaded mounting hole.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, four 8mm x 1.25mm threaded holes to attach side frames, and two mounting blocks @ 14 1/2" centers each with a 10mm x 1.25mm threaded mounting hole.
Side Frames
These frames have three 8mm x 1.25mm, and one 1/4" NC threaded holes along each edge.
Learn More -
ATV solder-on complete set
Top Tank
This tank has a 7/8" diameter hose connection, a 1 1/8" diameter hole for a fill neck, and an 18mm x 1.5mm threaded sensor fitting.
Bottom Tank
This tank has a 7/8" diameter hose connection, two mounting brackets on the side of the tank opposite the hose connection, and a mounting pin on the bottom.
Side Frames
These frames have a mounting bracket with a rubber grommet, and two mounting ears with 1/4" NC threaded holes.
Learn More -
John Deere complete rad set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1 3/8" diameter hole for a filler neck, and a deflection baffle.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Side Frames
These 47 7/16" long by 5 3/8" wide frames have eight 3/8" NC threaded nuts along the edge of the frame, and four 3/8" NC threaded nuts along the opposite edge.
Learn More -
Gen Set solder-on complete set
Inlet tank
This thank has a 1 1/2" diameter hose connection, a 1 1/4" diameter hole for a fill neck, and a 1/4" NPT flange for an expansion fitting.
Outlet Tank
This tank has a 1 1/2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
Left- This frame has two 1/4" NC threaded holes on the back, and three 5/16" NC threaded nuts along each edge.
Right- This frame has four 5/16" NC threaded nuts on the back, and three 5/16" NC threaded nuts along each edge.
Learn More -
Cummins 8.3 solder-on complete set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 3/4" diameter bypass hose, a 1/4" NPT flange on the top for an expansion fitting, a 1/4" NPT flange on the front, a pair of 1/2" NPT flanges on either side of the expansion baffle for sight glasses, and a 2" diameter stand pipe for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and two 1/4" NPT flanges.
Side Frames
These frames have two 1/2" NC threaded studs @ 36 1/4" centers offset towards the engine side.
Learn More -
Complete Radiator Set
TopTank
This tank has a 1" diameter hose connection, and a 1 3/8" hole for a filler neck.
Bottom Tank
This tank has a 1" diameter hose connection, a 1/2" NPT coupling for a drain, two 3/8" NC threaded mounting studs, and a 1/4" NPT flange on the grill side.
Side Frames
These frames are 20 1/2" long with two 1/4" NC threaded holes.
For this set, samples must be provided by the customer.
Learn More -
Solder-on complete tank set
Top Tank
This tank has a 2" diameter hose connection, a 1" diameter bypass connection in the center pointing towards the passenger side, and a 1 3/4" diameter hole for a filler neck in the top center of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 6" from the edge of tank to the center of the hose connection.
Sides
These side frames have a 6" outside diameter, they are 1" deep and 40" long.
Learn More