Top and Btm Tank
-
Lift Truck solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, and a stand pipe for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4 NPT flange for a drain fitting.
Learn More -
Caterpillar solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection 3 3/4" from the edge of the tank to the center of the pipe, a 1 3/8" diameter pipe on the top of the hose connection to attach a filler neck, and four 5/16" NC mounting nuts (two on each side) @21 1/2" centers.
Bottom Tank
This tank has a 2 1/4" diameter hose connection 3 3/4" from the edge of the tank to the center of the pipe, a 1/4" NPT flange for a drain fitting, and four 5/16" NC mounting nuts (two on each side) @21 1/2" centers.
Learn More -
Cat Excavator tank set
Top Tank
This tank has a 2" diameter hose connection, a hole for a filler neck, and two 5/16" NC threaded holes on each side of the tank for attaching the side frames.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" flange for a drain cock, and two 5/16" threaded holes on each side of the tank for attaching the side frames.
Brass version #9716 Learn More -
Gen Set solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection, two mounting blocks on the grill side with 12mm x 1.75mm threads, and a lifting ear on each end of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two mounting studs @ 12 1/2" centers, two mounting blocks on the grill side with 12mm x 1.75mm threads, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, and 1 1/16" diameter holes @ 10" centers for an oil cooler.
Learn More -
Gen solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, four mounting bosses to attach the side frames, and a hole for the filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and four mounting bosses to attach to the side frames. Learn More -
Solder on tank set
These tanks have a 1 3/8" diameter hose connection, two 1/4" NC threaded holes in the fan side, two 1/4" NC threaded holes on the grill side, and two mounting pins @ 13" centers. The top tank has a hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain.
Learn More -
Gen Set solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, and a 1 1/4" diameter hole for a fill neck.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, and two angle mounting brackets.
Learn More -
Lift Truck solder-on tank set
These tanks have a 1 1/2" diameter hose connection, and the inlet tank has a 1 3/8" diameter hole for a filler neck.
Learn More -
Cat solder-on set
Top Tank
This tank has a 2" diameter hose connection, a 1/2" NPT flange for a sight glass, and four 5/16" NC mounting nuts to attach side frames. This tank is 2" shallower than the kit #2103CK counterpart.
Bottom Tank - #2103B
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and four 5/16" NC mounting nuts to attach side frames.
Learn More