Top and Btm Tank
-
Grader solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1 1/4" diameter hole for a filler neck, a 1/4" NPT flange, and an in-tank baffle.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and a 1/4" NPT flange for drainage.
Learn More -
JCB solder-on tank set
These tanks have 1 1/2" diameter hose connections and a mounting block on each end to attach side frames. The bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 6 1/4" from the edge of the tank to the center of the pipe, and two 1/4" NPT flanges (one on the engine side, and one on the grill side) 13 3/4" from the edge of the passenger-side of the tank to the center of the fitting.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 6 1/4" from the edge of the tank to the center of the pipe, a 1/4" NPT flange on the engine side for a drain fitting, and four 3/8" NC mounting bolts.
Learn More -
Case Tractor solder-on tank set
Top Tank
This tank has a hole for a filler neck, a 1/8" NPT fitting, two 1/4" NC threaded holes on the fan side, a 2 1/4" diameter hose connection, and four 5/16" NC threaded nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, four 5/16" NC threaded nuts to attach side frames, a 18mm x 1.5mm threaded boss for a sensor, and a 1/4" NPT flange for a drain fitting.
Learn More -
International Navistar solder-on tank set
This tank has a 3/8" NF threaded hole on one end, a mounting pin on each end, three 5/16" threaded blocks on the grill side, and a 1" diameter hose connection.
Note: these tanks are almost identical, with the only difference being the location of the mounting blocks.
Learn More -
Isuzu solder-on tank set
Top Tank
This tank has a 18mm x 1.5mm flange for a sensor fitting, a stand pipe for a filler neck, a 1 1/2" diameter hose connection, and a hole on each end to attach side frames.
Bottom Tank
This tank has a 1/4" NPT flange for a drain fitting, a 1 1/2" diameter hose connection, and two holes for an oil cooler on the grill side spaced @14 3/8" centers.
Learn More -
Hino solder-on tank set
Top Tank
This tank has a 2 1/8" diameter hose connection, a 1 1/4" diameter hole for a filler neck, an 18mm flange for a sensor, and two 5/16" NC threaded holes on each end to attach side frames.
Bottom Tank
This tank has a 2 1/8" diameter hose connection, two 5/16" NC threaded holes on each end to attach side frames, and a 1/4" NPT flange for a drain fitting.
Learn More -
Case solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, four 5/16" NC nuts to attach side frames, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1" diameter bypass connection, four 5/16" NC nuts to attach side frames, and a 1/4" NPT flange on the grill side for a drain fitting.
Learn More -
Komatsu solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 1 3/4" diameter hole on top for a filler neck, a 1/2" NC threaded bung for an isolation grommet to attach to, and a 1/8" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, a 3/8" NPT flange for a drain fitting, and a 10 plate oil cooler with fittings @ 10" centers (#1010PC).
Learn More -
Gen Set solder-on set
Top Tank
This tank has a 2 1/4" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 3/8" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More