Top and Btm Tank
-
Freightliner Solder-On tank set
These tanks have a 3" diameter hose connection 5 3/4" from the edge of the tank to the center of the hose connection (opposite ends for top or bottom tanks), and a 1/4" NPT flange for either a drain cock or an expansion fitting.
Note: this kit comes supplied with a 1/4" NPT x 3/8" hose barb, a 1/4" NPT drain cock, and eight 5/16" NC x 4 1/2" bolts with nuts.
Learn More -
Forklift solder-on tank set
Top Tank
This tank has a 1 3/8" diameter hose connection, a 3/8" NPT flange for a low coolant sensor, a pipe for the filler neck, and two brackets for mounting side frames.
Bottom Tank
This tank has a 1 3/8" diameter hose connection, a 1/4" NPT fitting for a drain, two mounting studs, and two holes for an oil cooler. Learn More -
Cat Loader solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, two 5/16" NC threaded holes on each end to attach side frames, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, two 5/16" NC threaded holes on each end to attach side frames, and a 1/4" NPT flange for a drain fitting.
Learn More -
John Deere 540B Skidder solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1 3/8" diameter hole for a filler neck, and a deflection baffle.
Bottom Tank
This tank has a 2" diameter hose connection, two holes for the oil cooler (one on the grill side and one on the fan side), and a 1/4" NPT flange for a drain fitting on the grill side.
Note: oil cooler must be supplied by the customer.
Learn More -
Cat / Case / John Deere solder on tank set
(both tanks are identical)
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the pipe, a 3/8" NPT coupling for a drain or expansion fitting, and two mounting bolt sleeves for 3/8" diameter bolts @16 5/8" centers. Learn More -
Cat / Case / John Deere solder on tank set
(both tanks are identical)
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the pipe, a 3/8" NPT coupling for a drain or expansion fitting, and two mounting bolt sleeves for 3/8" diameter bolts @16 5/8" centers.
Learn More -
Solder On tank set
Top Tank
This tank has a pair 1 1/2" diameter hose connections (2 1/2" long) 3 3/4" from the edge of the tank to the center of the hose connections, a 1" bypass hose (1 1/2" long) 9 7/8" from the edge of the tank, a pair of 1/4" NPT flanges 9" in from the edge of the tank (above and below each other), and a fill neck hole in the top center of the tank. This tank has a de-airation baffle.
Bottom Tank
This tank has a 2" diameter hose connection (2 1/2" long) 3 1/4" from the edge of the tank to the center of the hose connection, and a 1418PC plate oil cooler (14 plates, 18" centers) running from the other end.
Learn More -
Case solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 1/2" NPT flange for a sight glass, two mounting brackets, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two mounting brackets, and a 1/4" NPT flange for a drain fitting.
Learn More -
Heater Core solder-on tanks
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Bus solder-on tank set
These tanks have a 2 3/8" diameter hose connection. The top tank has a 1/4" NPT flange for an expansion fitting, and a 1/4" NC threaded hole on the end. The bottom tank has a 1/4" NC threaded hole on the end. Learn More