Top and Btm Tank
-
Cat Loader solder-on
These tanks have 2" diameter hose connections and two 5/16" NC threaded holes on each end to bolt the side frames to. The top tank has hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Kubota solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection 6 7/8" from the edge of the tank to the center of the pipe, two 1/2" diameter mounting pins @21 1/2" centers, two 1/4" NC nuts on either side of the tank @14 1/4" centers, and a 1 1/4" diameter hole on the top for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection 5 5/8" from the edge of the tank to the center of the pipe, a 5/8" diameter hose connection 3 7/8" from the edge of the tank to the center of the pipe, two 1/2" diameter mounting pins @15 3/4" centers, two 1/4" NC nuts on either side of the tank @14 1/4" centers, and a PTO cutout in the middle of the tank.
Learn More -
Gen solder-on tank set
These tanks have 1 1/2" diameter hose connections, and a bracket with two holes on each end. The top tank has a 1 3/4" diameter hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Case Tank Set
Top Tank
This tank has a 1 3/4" diameter hose connection, a hole for a filler neck, a 1/4" NPT flange for a sensor, and four 5/16" NC threaded hex nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and four 5/16" NC threaded hex nuts to attach the side frames.
Learn More -
Case Tractor solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and four 5/16" NC threaded nuts to attach side frames.
Bottom Tank
This tank has 2 1/4" diameter hose connection, a 1" diameter bypass hose, a 1/4" NPT flange for a drain fitting on the grill side, and four 5/16" NC threaded nuts to attach side frames.
Learn More -
Solder-on tank set
This tanks have 2" diameter hose connections, and the top tank has a 3/8" NPT flange and a 1 3/4" diameter hole for a filler neck.
Learn More -
Volvo Loader solder-on tank set
Top Tank
This tank has a 2" diameter hose connection.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More -
John Deere solder-on tank set
These tanks have 2 1/4" diameter hose connections. The top tank has a 1 1/4" diameter hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Cat Fork Lift solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, two hoses to accommodate an oil cooler, and a 1/4" NPT flange for a drain fitting.
Learn More -
John Deere Loader
Top Tank
This tank has a 1 3/4" diameter hose connection 3" from the edge of the tank to the center of the hose connection, two "ears" for lifting the completed unit, and a 1 3/8" diameter hole on the top of the tank for the filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 5 plate 8" center oil cooler (to be provided by the customer), and a 1/4" NPT flange for a drain cock.
Learn More