Top and Btm Tank
-
Solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Case tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a stand pipe for a filler neck, and four 5/16" NC threaded nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and four 5/16" threaded nuts to attach the side frames.
Learn More -
Stationary Unit solder-on tank set
These tanks have a 1 3/4" diameter hose connection. The top tank has a 1 1/4" diameter hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/8" diameter hose connection.
Learn More -
John Deere solder-on tank
This tank has a 1 1/2" diameter hose connection, and a stand pipe
for a filler neck.
Front and back view shown here.
Learn More -
Gen solder-on tank
This Gen tank has a 2" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, a hole at the top center of the tank to accommodate a passenger style filler neck, and a deflection baffle near the base of the tank. Learn More -
Solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection 9 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT fitting to accommodate a vent 11 7/8 from the edge of the tank, and a 1 3/4" filler neck hole on the top center of the tank.
Bottom Tank
This tank has a 2 1/2" hose connection 3" long 6 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the grill side of the tank for a drain cock, and a pair of 1/2" NC @ 2" long mounting bolts at 25" centers.
Learn More -
Komatsu solder-on tank set
The top tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for an expansion plug, and a 1 3/4" diameter hole for a filler neck. The bottom tank has a bolt-on style flange.
Learn More -
Toyota Land Cruiser solder on kit
Top Tank
This tank has a 1 1/2" diameter hose connection, two 1/4" NC threaded nuts on the fan side, two 5/16" NC threaded nuts on each en to attach side frames. and a hole for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, two clips, a 1/4" NPT flange for a drain fitting, and two 5/16" NC threaded nuts on each end to attach side frames.
Learn More -
Toyota Land Cruiser solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, two 1/4" MC threaded nuts on the fan side, two 5/16" threaded holes on each end to attach side frames, and a hole for a filler neck.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, two 5/16" NC threaded blocks on the fan side, a 1/4" NPT flange for a drain, two 5/16" threaded holes on each end to attach side frames, and two clips.
Learn More