Top and Btm Tank
-
Lawn Mower tank set
Top Tank
This tank has four 1/4" NC threaded nuts for mounting side frames, a 1" diameter hose connection, two angled brackets with 5/16" diameter holes, and a 1" diameter hole to accommodate a filler neck.
Bottom Tank
This tank has four 1/4" NC threaded nuts for mounting side frames, a 1" diameter hose connection, a 1/4" NPT flange for a drain cock, and two mounting studs.
Samples required to build this set.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection 2 3/4" long and 2 3/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange.
Bottom Tank
This tank has a 1 1/2" diameter hose connection 2 3/4" long and 1 1/4" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange, and holes to accommodate an oil cooler.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2" diameter hose connection 2 3/4" long and 5" from the edge of the tank to the center of the hose connection, a 1 1/4" diameter hole for a filler neck, and a deflection baffle.
Bottom Tank
This tank has a 2" diameter hose connection 3" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on the grill side of the tank.
Note: both tanks have a notch in the center.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/4" diameter hose connection, and a 1/1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, and a 1 1/4" NPT flange for a drain.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2"diameter hose connection, a 1/8" NPT flange, a hole for a filler neck,a 3/8" NPT flange, and a mounting bracket with 1/2" NC threaded holes.
Bottom Tank
Thistank has a 2" diameter hose connection, a 3/8" NPT flange for a drain,two mounting brackets with holes spaced @ 25", and an 18 plate oilcooler with fittings spaced @ 18" (1818PC). Learn More -
Solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection 1 1/4" from the edge of the tank to the center of the pipe, and a 1 1/4" diameter hole on the top of the tank for a filler neck 4" from the edge of the tank to the center of the hole.
Bottom Tank
This tank has a 1 3/4" diameter hose connection 1 1/4" from the edge of the tank to the center of the pipe, and two 1/2" NC mounting bolts 3" long @6" centers.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, and a threaded block on each end for mounting the side frames.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1 1/2" diameter through pipe, and a threaded block at each end for mounting the side frames.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, a 3/4" NPT flange for a sensor fitting, and a 1 3/4" diameter hole in the top center for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/4" diameter hose connection, a 1 1/4" diameter hole in the top center of the tank for a filler neck, and a 1/2" NPT flange.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and a channel welded to the bottom of the tank for mounting purposes.
Learn More -
Solder-on tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Learn More