Top and Btm Tank
-
Solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1/2" NPT flange for a sight glass, a threaded block to accommodate a ground wire, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection 5" long, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, a 1 3/8" diameter hole for a fill neck, and one end of the tank is sloped while the other end has an indent.
Bottom Tank
This tank has a 1 1/4" diameter hose connection that angles towards the ground, and two mounting pins.
Learn More -
Solder-on tank set
These tanks have 2 1/4" diameter hose connections, and the top tank has a 1 5/8" diameter hole for a filler neck and a 3/8" NPT flange.
Learn More -
Solder-on tank set
These tanks have 1 1/4" diameter hose connections and a 1/4" NPT flange. The top tank has a hole for a filler neck, and the bottom tank has has a mounting bracket.
Side frames have two 5/16" NC threaded nuts, and two 1/4" threaded nuts.
Learn More -
Solder-on tank set
The top tank has a 1 3/4" diameter hose connection and a hole for a filler neck, and the bottom tank has a 2 1/2" diameter hose connection.
Learn More -
Solder-on Tank Set
Top Tank
This tank has one bolt-on flange with a 3 1/2" diameter hole 9 7/8" from the end of the tank, and 2 5/8" from the side of the tank.
Bottom Tank
This tank has one bolt-on flange with a 3 1/2" diameter hole 4 7/8" from the end of the tank, and 2 5/8" from the side of the tank.
SAMPLE REQUIRED
Learn More -
Solder-on Tank Set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 5/8" diameter bypass hose that bends @ 90o, and two mounting brackets.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and identical mounting brackets as the top tank.
Learn More -
Solder-on tank set
These tanks have a 1" diameter hose connection. The top tank has a 3/4" diameter hole, and the bottom tank has a 1/4" NPT flange for a drain/expansion fitting.
Learn More -
Solder-on Tank Set
Top Tank
This tank has a 1 1/4" NPT nipple 8 1/2" long, and a bracket on each side for mounting.
Bottom Tank
This tank has two 1 1/4" NPT nipples 8 1/2" long, a bracket on each side for mounting, and a baffle offset from the center.
Learn More