Top and Btm Tank
-
Solder-on tank set
The top tank has a 2" diameter hose connection and a 1 3/4" diameter hole for a filler neck, and the bottom tank has a 2 1/2" diameter hose connection.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/8" diameter hose connection, two keyhole mounting brackets, a hole for a filler neck, two 1/4" NC threaded holes on the fan side, and two 1/4" NC threaded holes on the grill side.
Bottom Tank
This tank has a 1 1/8" diameter hose connection that bends upward at a 90o angle, a 1/4" NPT flange for a drain fitting, two mounting studs @ 8" centers, two 1/4" NC threaded holes on the fan side, and two 1/4" NC threaded holes on the grill side.
Learn More -
Lawn Mower tank set
Top Tank
This tank has a 1" diameter hose connection, four 1/4" NC threaded holes to mount the side frames, and brackets on each end to mount into engine.
Bottom Tank
This tank has a 1" diameter hose connection, four 1/4" threaded holes for mounting the side frames, a PTO cutout in the center, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on Tank Set
Top Tank
This tank has a 1 3/4" diameter hole in the top center of the tank to accommodate a truck filler neck, and a 2" diameter hose connection (3" long) 4" from the edge of the tank to the center of the hose connection.
Bottom Tank
This tank has a 1/4" flange for a drain cock 2 1/2" from the edge of the tank, and a bolt-on style flange with a 2" diameter hole with a pair of 5/16" threaded holes. Flange is located 4" from the edge of the tank to the center of the hole.
Learn More -
Solder-on tank set
These tanks have 2" diameter hose connections 2 1/2" long, and the top tank has a 1" diameter bypass hose and a hole for a filler neck.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2" diameter hose connection 7 1/2" from the edge of the tank to the center of the pipe, and a 1 1/4" diameter hole on the top-center for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection 6 3/4" from the edge of the tank to the center of the pipe, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
These tanks have a 1" diameter hose connection, and the top tank has a hole for a filler neck.
Learn More -
Solder-on tank set
Top Tank
This than has a 3" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 3" diameter hose connection that angles out and up, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a 1 3/4" diameter hole in the top center of the tank for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange on the grill side.
Learn More -
Solder-on Tank Set
Top Tank
This tank has a 2" diameter hose connection 3 1/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange to accommodate an expansion tube 5 1/4" from the edge of the tank.
Bottom Tank
This tank has a 2" diameter hose connection 3 1/4" from the edge of the tank to the center of the hose connection, and a 3/8" NPT flange 2 3/8" from the edge of the tank.
Note: kit comes with a 1/4" NPT hose barb and a 3/8" NPT square headed plug.
Learn More