Top and Btm Tank
-
Top and btm tanks as per sample Top tank hose conn. 2" dia., and 1/2" threaded holes, brackets on each end for rails. Btm tank hose conn. 2" dia., a 1/4" threaded hole with bypass tube pointing down on each side, brackets on each end for rails. NOTE: these tanks are not stock items, plastic tanks are "in house" that we reproduce in steel and solder dip. Learn More -
Top and btm tanks as per sample Top tank hose conn. 2 1/2" dia. and 1/2" threaded holes, brackets on each end for side rails Btm tank hose conn. 2 1/2" dia. and 1/4" threaded hole with bypass tube pointing down on each side, brackets on each end for rails. NOTE: these tanks are not stock items, plastic tanks are "in house" that we reproduce in steel and solder dip. Learn More -
Solder-on Complete Tank Set
Top Tank
This tank has a 1 5/8" diameter hose connection 1 3/4" from the edge of the tank to the center of the hose connection, and a 1 3/8" diameter hole on the top of the tank for a fill neck.
Bottom Tank
This tank has a 1 5/8" diameter hose connection 2 3/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange next to the hose connection.
Frames
These frames are 18 3/8" tall with two mounting brackets on the back, and 5/16" slotted holes along the sides for mounting the shroud.
Learn More -
Solder-on tank set
Top Tank
This tank has a 3/4" diameter hose connection, and a 1 1/4" diameter hole in the top of the tank for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/2" NPT flange for a drain, and a PTO cutout in the center of the tank.
Learn More -
Solder-on tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/4" diameter hose connection, a 1 1/4" diameter hole in the top center of the tank for a filler neck, and a 1/2" NPT flange.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and a channel welded to the bottom of the tank for mounting purposes.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, a 3/4" NPT flange for a sensor fitting, and a 1 3/4" diameter hole in the top center for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, and a threaded block on each end for mounting the side frames.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, a 1 1/2" diameter through pipe, and a threaded block at each end for mounting the side frames.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection 1 1/4" from the edge of the tank to the center of the pipe, and a 1 1/4" diameter hole on the top of the tank for a filler neck 4" from the edge of the tank to the center of the hole.
Bottom Tank
This tank has a 1 3/4" diameter hose connection 1 1/4" from the edge of the tank to the center of the pipe, and two 1/2" NC mounting bolts 3" long @6" centers.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2"diameter hose connection, a 1/8" NPT flange, a hole for a filler neck,a 3/8" NPT flange, and a mounting bracket with 1/2" NC threaded holes.
Bottom Tank
Thistank has a 2" diameter hose connection, a 3/8" NPT flange for a drain,two mounting brackets with holes spaced @ 25", and an 18 plate oilcooler with fittings spaced @ 18" (1818PC). Learn More