Top and Btm Tank
-
Case solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a stand pipe for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange on the hose connection for a drain fitting.
Learn More -
JCB solder-on tank set
Top Tank
This tank 1 1/2" diameter hose connection, a 1/4" NPT flange to accommodate an expansion fitting, and mounting brackets on each end.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, and mounting brackets on each end. Learn More -
Komatsu Loader solder-on tank set
These tanks have 2 1/4" diameter hose connections. The top tank has a 3/4" NPT flange for a sensor, and a 1 3/4" diameter hole for a fill neck. The bottom tank has a 1/2" NPT flange for a drain fitting and a #1418PC plate oil cooler.
Learn More -
Hyster Lift Truck solder-on set
These tanks have 1 1/4" diameter hose connections, four 5/16" NC threaded bosses to attach side frames, a 1/4" NPT flange for an expansion/drain fitting, and the inlet tank has a stand pipe for a filler neck.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/8" diameter hose connection, two keyhole mounting brackets, a hole for a filler neck, two 1/4" NC threaded holes on the fan side, and two 1/4" NC threaded holes on the grill side.
Bottom Tank
This tank has a 1 1/8" diameter hose connection that bends upward at a 90o angle, a 1/4" NPT flange for a drain fitting, two mounting studs @ 8" centers, two 1/4" NC threaded holes on the fan side, and two 1/4" NC threaded holes on the grill side.
Learn More -
Lawn Mower tank set
Top Tank
This tank has a 1" diameter hose connection, four 1/4" NC threaded holes to mount the side frames, and brackets on each end to mount into engine.
Bottom Tank
This tank has a 1" diameter hose connection, four 1/4" threaded holes for mounting the side frames, a PTO cutout in the center, and a 1/4" NPT flange for a drain cock.
Learn More -
Woodchipper solder-on tank set
Top Tank
This tank has two 2 1/2" diameter hoseconnections, two 1/2" NPT fittings for sight glasses, and a baffle thatsplits the tank between the hose connections.
Bottom Tank
This tank is a blank tank with no hose connections, fittings, or baffle. Learn More -
International Loader tank set
Top Tank
This tank has a 2" diameter hose connection, a deflection baffle, a sight glass flange on the grill side, and a hole for a filler neck.
Bottom Tank
This tank has a 2 3/4" diameter hose connection, a 1/2" NPT flange for a drain, and a 12 plate oil cooler with 14 3/4" centers (to be provided by the customer).
Learn More -
Solder-on Tank Set
Top Tank
This tank has a 1 3/4" diameter hole in the top center of the tank to accommodate a truck filler neck, and a 2" diameter hose connection (3" long) 4" from the edge of the tank to the center of the hose connection.
Bottom Tank
This tank has a 1/4" flange for a drain cock 2 1/2" from the edge of the tank, and a bolt-on style flange with a 2" diameter hole with a pair of 5/16" threaded holes. Flange is located 4" from the edge of the tank to the center of the hole.
Learn More -
Solder-on tank set
These tanks have 2" diameter hose connections 2 1/2" long, and the top tank has a 1" diameter bypass hose and a hole for a filler neck.
Learn More