Top and Btm Tank
-
Gen Set solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, two lifting ears, two 10mm x 1.5mm mounting bosses on the grill side, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, two 3/4" diameter mounting studs @ 9 1/4" centers, and a 1/4" NPT flange for a drain fitting.
SAMPLE REQUIRED
Learn More -
Solder-on Tank Set
Top Tank
This tank has a 2" diameter hose connection 3 1/4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange to accommodate an expansion tube 5 1/4" from the edge of the tank.
Bottom Tank
This tank has a 2" diameter hose connection 3 1/4" from the edge of the tank to the center of the hose connection, and a 3/8" NPT flange 2 3/8" from the edge of the tank.
Note: kit comes with a 1/4" NPT hose barb and a 3/8" NPT square headed plug.
Learn More -
Case Tractor solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection 5 1/4" from the edge to the center of the HC, and a hole on the top for a filler neck.
Bottom Tank
This tank has a 2 1/4" diameter hose connection 4 1/2" from the edge to the center of the HC, and a 1/4" NPT flange.
Learn More -
Gen Set solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection, four 5/16" NC threaded nuts to attach side frames, a 3/4" NPT flange, and a 1/4" NPT flange.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, four 5/16" NC threaded nuts to attach side frames, and a 1/8" NPT flange.
Side Frames
These frames have two mounting ears on the back, two 5/16" NC nuts on the back, and four clearance holes to bolt to the tanks.
Learn More -
GMC Top Kick tank set
Top Tank
This tank has a 1 7/8" diameter hose connection.
Bottom Tank
This tank has a 1 7/8" diameter hose connection, a 1/4" NPT flange for a drain cock, two 1 1/4" holes @ 11 1/2" centers for an oil cooler, a 1/2" diameter connection at the end of the tank for an expansion tube, and a 3/4" diameter bypass hose coming out of the fan side of the tank.
Note: this tank is similar, but not identical to brass kit #9805.
Learn More -
Lada solder-on tank set
Top Tank
This tank has a 22mm x 1.5mm threaded hole for a sensor fitting, a 1/4" NPT flange for a drain fitting, a stand pipe to accommodate a foreign style filler neck, and a 1 1/4" diameter hose connection.
Bottom Tank
This tank has a 1 1/4" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and a 3/4" diameter bypass hose.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1/2" NPT flange for a sight glass, a threaded block to accommodate a ground wire, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection 5" long, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More -
John Deere solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1 1/4" diameter hole on the top, and a 1 3/8" diameter hole on the top.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Woodchuck Woodchipper solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a filler neck hole at the top of the tank, four 5/16" NC threaded pins for mounting side frames, and a 1/2" NPT flange for a sensor or sight glass.
Bottom Tank
This tank has two 1/2" NC threaded mounting blocks @ 11 1/4" centers, a 1/4" NPT flange, a 1 1/2" diameter hose connection, four 5/16" NC threaded pins for mounting side frames, and a PTO cut-out in the bottom center of the tank.
Learn More