Top and Btm Tank
-
Motor Home tank set
Top and bottom tanks areidentical. Each tank has a 2 1/4" diameter hose connection, and a 1/4"NPT flange for a drain cock or an expansion fitting. Learn More -
Ingersol Rand Gen solder-on set
Top Tank
This tank has a 1 1/8" diameter hose connection, a 5/16" NC nut at each end for mounting the side frames, and a block with 1/4" NC threaded holes on each side.
Bottom Tank
This tank has 1 1/8" diameter hose connection, a 5/16" NC nut at each end for mounting the side frames, and four 5/16" NC threaded holes on the top of the tank.
Note: for this set, samples must be supplied by the customer. Learn More -
Rock Crusher solder-on tank set
These tanks have 2 1/2" diameter hose connections, and two threaded nuts in each corner. The top tank has a 1/2" NPT flange, and the bottom tank has a 1/4" NPT flange.
Learn More -
Tractor solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 8 3/4" from the edge of the tank to the center of the pipe, a stand-pipe for a filler neck 3 3/4" from the edge of the tank to the center of the pipe, and a mounting block on each end with two 5/16" NC threaded holes.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 5" long 8 1/4" from the edge of the tank to the center of the pipe, a 1/4" NPT coupling for a drain fitting, and a mounting block on each end with two 5/16" NC threaded holes.
Learn More -
Solder-on tank set
The top tank has a 2" diameter hose connection and a 1 3/4" diameter hole for a filler neck, and the bottom tank has a 2 1/2" diameter hose connection.
Learn More -
Mitsubishi tank set
Top Tank
This tank has a 1 3/4" diameterhose connection, a threaded bar with 1/4" threaded holes at each end ofthe tank, a 1/4" nut on top, and a 1 1/8" diameter hole on the top fora filler neck.
Bottom Tank
This tank has a 1 3/4"diameter hose connection, a bracket at each end with 1/4" NC threadedholes to mount the side frames, and a 1/4" NPT flange for a drain cock. Learn More -
Cat Loader 930G tank set
Top Tank
This tank has a 2 1/4" diameter hose connection, four 5/16" NC threaded nuts to attach the side frames, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1" diameter bypass hose connection, a 3/8" NPT flange for a sensor fitting, a four 5/16" NC threaded nuts to attach the side frames.
Learn More -
Lift Truck solder-on tank set
These tanks have 1 3/4" diameter hose connections, four 1/4" NC threaded holes to attach side frames, and two mounting pins (9 7/8" centers on top, 10 1/2" centers on btm). The top tank has a hole for a filler neck, and the bottom tank has a PTO cutout, and a 1/4" NPT coupling on the grill side for a drain fitting. Learn More -
Generator solder-on tank set
Inlet / Outlet Tank
This tank has a pair of 1 1/4" diameter hose connections (one at each end).
End Tank
This tank has a 3/8" NPT flange in the center of the tank, and a pair of brackets on the ends for mounting.
Note: originally Modine built radiator. Learn More -
Mitsubishi tank set
Top Tank
This tank has a 1 3/4"diameter hose connection, a mounting block at each end with 1/4"threaded holes for mounting the side frames, and a 1/4" NC threaded nuton the grill side.
Bottom Tank
This tank has a 13/4" diameter hose connection, a 1/4" NPT fitting for a drain, two 1/4"NC threaded nuts in the tank, and a threaded block at each end with1/4" NC threaded holes for mounting the side frames. Learn More