Top and Btm Tank
-
John Deere solder-on tank kit
The top tank has a 2 1/4" diameter hose connection, a filler neck, and a 1/4" NPT flange for an expansion fitting. The bottom tank has a 2 1/2" diameter hose connection, a 3/4" connection, and a 1/4" NPT flange for a drain. Each tank has a mounting boss with a rubber insert at each end.
Individual tanks #4262 and #4263.
Learn More -
John Deere solder-on kit
These tanks have 2 1/4" diameter hose connections, and one tank has a steel bracket on the back.
Individual tanks #3070 and #3071.
Learn More -
John Deere kit
These tanks have 2 1/2" diameter hose connections with a 1/4" flange for a drain cock on the bottom tank's connection. There is a steel bracket on the tanks with a clamp reinforcing the hose connections.
Individual tanks #4147 and #4148.
Learn More -
John Deere solder-on tank kit
These tanks have 1 1/2" diameter hose connections. The inlet tank has a 1/4" NPT flange for a drain, and the outlet tank has a filler neck.
Individual tanks #4174 and #4175.
Learn More -
Hitachi solder-on tank kit
These tanks have 2 3/8" diameter hose connections, the top tank has a filler neck and the bottom has a 1/4" NPT flange for a drain. Mounting brackets on each end.
Individual tanks #4234 and #4235. Learn More -
Cat solder-on tank kit
Top and bottom tanks have a2" diameter hose connection. The top tank has a filler neck, and thebottom tank has a drain cock. Both tanks have mounting brackets oneach end. Steel version #032309A Learn More -
Cat solder-on tank kit
These tanks are identical. They have 1 3/4" diameter hose connections facing the center of the tank.
Individual tank #4231.
Learn More -
Case Solder-on Kit
Top Tank
This tank has a 2" diameter hose connection, two mounting bosses with rubber inserts, and a filler neck on the top driver side.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a hole for a 1/4" NPT drain cock and flange (supplied).
Individual tanks #4260 and # 4261.
Learn More -
Case Solder-on Kit
Top Tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a fill neck attached on top of the hose connection.
Bottom tank
This tank has a 2 1/4" diameter hose connection, two mounting bosses with rubber inserts, and a hole for a 1/4" NPT drain cock and flange (supplied).
Individual tanks #4256 and #4257.
Learn More -
Case 7120 Tractor solder-on tank kit
These tanks have 2 1/4" diameter hose connections and steel brackets on the backs. The top tank has a raised filler neck, and the bottom tank has mounting studs. Various 1/4" NPT flanges for drain/expansion fittings.
Individual tanks #4153-S and #4154-S Learn More