Tank
-
Case solder-on tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange, and two 1/2" NC threaded mounting studs @ 14 3/4" centers.
Learn More -
Solder-on tank
This tank has a 1 1/2" diameter hose connection 2" long, which is 5 3/4" from the edge of the tank to the center of the hose connection, and a 1/2" NPT flange 6" in from the other end. It has a 1 5/8" hole on the top center of the tank to accommodate a fill neck. Learn More -
International solder-on tank
This tank has a 2 1/2" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, and a 1/4" NPT fitting on end for an expansion tube.
Learn More -
Volvo Loader solder-on tank
This tank has a 2 1/4" diameter hose connection, and a 14mm x 1.5mm flange for a drain assembly. The cross section of the tank is semi-circular.
Learn More -
-
Solder-on tank
This tank has a 2 1/4" diameter hose connection, a 1/2" NPT flange, a 1/4" NPT flange, and two holes for an oil cooler
Learn More -
Hyster Lift Truck solder-on top tank
This tank has a 1 1/2" diameter hose connection.
Pairs with tank #081707A.
Learn More -
Solder-on tank
This tank has a 1 3/4" diameter hose connection 2 1/2" from the edge of the tank to the center of the hose connection, two slotted holes for mounting, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on tank
This tank has a 1 3/8" diameter hose connection, a 3/4" bypass pipe, and 3/8" NPT fitting for a drain.
Learn More -