Tank
-
Solder-on tank
This tank has a 2 1/4" diameter hose connection 1 1/2" from the edge of the tank to the center of the hose connection.
Learn More -
Case Loader solder-on tank
This tank has a 2 1/4" diameter hose connection 7 1/4" in from the edge of the tank to the center of the hose connection.
Learn More -
Hyster Lift Truck solder-on tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange, ahole at one end for a filler neck, and a bracket on the grill side ofthe tank. Learn More -
Cat Loader solder-on tank
This tank has a 2 1/4" diameter hose connection, two 1/2" NPT flanges, and a 1 3/4" diameter hole in the top center for a filler neck.
Learn More -
Cat Loader solder-on tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Hydraulic Tank
This hydraulic tank has two 1/2" NPT flanges for sight glasses, two 3/4" flanges for hydraulic fittings, a 1" NPT flange for a hydraulic fitting, a 1 1/4" NPT flange for a hydraulic fitting, a fill pipe, an access cover plate, an access hole with threaded nuts, a 3/4" NPT flange for a drain, four feet with slotted holes for mounting (two feet are inset from the others), a 1 1/4" NPT flange for an oil filter to screw into, and a baffle inside the tank to reduce sloshing. Learn More -
Solder-on Tank
This tank has a 2 1/4" diameter hose connection 2 1/4" from the edge of the tank to the center of the hose connection.
Learn More -
Generator solder-on tank
This tank has a 2 1/2" diameter hose connection 3 inches from the edge of the tank to the center of the hose connection, a 3/8" NPT coupling on the side of the hose connection, a 3/8" NPT coupling on the engine side, a 1/4" NPT flange on the top for an expansion fitting, a 1 1/4" diameter hole on top for a filler neck, and a baffle 10 1/2" long 2 1/4" up from the header.
Learn More -
Cat solder-on
This tank has a 2" diameter hose connection, a 3/8" NPT flange for a drain, and an 18 plate oil cooler with 18" centers (#1818PC). OEM tank with metric fittings would need to be supplied by the customer, but a #1818PC with 3/4" NPT fittings can be provided to substitute.
Learn More -
Solder-on Top Tank
This tank has a 2 1/4" hose connection, a 3/8" NPT flange, and a 1 3/8" diameter hole in the top center for a fill neck.
Learn More