Tank
-
Hydraulic Tank
This hydraulic tank has a 1/2" NPT fitting on the bottom of the tankfor a drain, two 1/2" NPT fittings on the front of the tank, a 3/4" NPTfitting on the front of the tank, a 1 1/4" NPT nipple on the front ofthe tank, a bolt-on flange on the top of the tank with ten 5/16" NCthreaded studs, and two mounting feet on each side - each with two 3/8"diameter holes for bolting down.
Learn More -
Lift Truck solder-on tank
This tan has a 2" diameter hose connection, and a 1/4" NPT flange.
Learn More -
Bus solder-on tank
This tank has two 2" diameter hose connections, two 1/4" NPT flangesfor drainage, a baffle splitting the tank between the hose connections,and four 5/16" NC threaded studs.
Note: for this tank, a sample must be provided by the customer.
Learn More -
Gen Set solder-on tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Gen Set solder-on tank
This tank has a 2 1/4" diameter hose connection, and a 1/4" NPT flange.
Learn More -
Bus solder-on tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Learn More -
Bus solder-on tank
This tank has a 2 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Learn More -
Solder-on Tank
This tank has a 2 3/8" diameter hose connection 12" from the edge of the tank to the center of the hose connection.
Learn More -
Cat solder-on tank
This tank has a 3" diameter hose connection, and a 3/8" NPT flange on the hose connection for a drain fitting.
Learn More -