Tank
-
Case Tractor tank
This tank has a 2" diameter hose connection 4 3/4" in from the edge of the tank to the center of the hose connection.
Learn More -
-
Clarke Lift Truck solder on tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and two holes @ 18" centers to accommodate an oil cooler.
Learn More -
Solder-on Tank
This tank has a 1 1/2" diameter hose connection in the upper right corner 2 1/2" long.
Learn More -
Lift Truck solder-on tank
This tank has a 1 1/2" diameter hose connection, and a 1/4" NPT flange.
Learn More -
International solder-on tank
This tank has a 2 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and two holes to accommodate an oil cooler (can be ordered with a 718PC oil cooler already welded in).
This tank matches brass tank #4127.
Learn More -
Gen Set solder-on tank
This tank has a 2" diameter hose connection, 3" from the edge to the center of the HC, and a 1/4" NPT flange 17" from the edge to the center of the flange.
Learn More -
Generator Solder-On tank
This tank has a 2" diameter hose connection 3" long and 3 1/4" from theedge of the tank to the center of the hose connection, and a baffleinside the tank placed 7 1/2" from the edge of the tank to the baffle. Learn More -
Solder-on tank
This tank has a 2 1/4" diameter hose connection 2 1/2" long, and a 1/4" NPT flange for a drain fitting.
Learn More -
John Deere solder-on tank
This tank has a 2" diameter hose connection on the driver's side 2 3/8" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange on the grill side of the tank 4 3/4" from the edge of the tank.Front and back views shown here.
Learn More