Inlet and Outlet Tanks
-
Solder-on tank set
Outlet Tank
This tank has a 1 1/8" diameter hose connection, and a stand pipe for a filler neck.
Inlet tank
This tank has a 1 1/8" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Toyota Lift Truck solder-on tank set
Outlet Tank
This tank has oil cooler holes 10 3/4" from center to center, akeyhole style bracket on the back for mounting, and a pipe toaccommodate a filler neck. There are three 5/16 NC nut for mountingside frames onto the tanks, a clip on each side of the tank, and a 11/4" hose connection 1 3/4" from the edge of the tank to the center ofthe hose connection.
Inlet Tank
This tank has four 5/16" nuts for mounting side frames to the tank,a keyhole style bracket on the back for mounting the tank, a 1/4" NPTflange to fit a drain cock, a clip on each side of the tank, and a 11/4" hose connection 2 3/4" from the edge of the tank to the center ofthe hose connection.
Learn More -
Cat Lift Truck solder-on tank set
Inlet Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange, and a mounting bracket.
Outlet Tank
This tank has a 1 1/2" diameter hose connection, a 1 3/8" diameter hole for a filler neck, a 1/4" NPT flange, and a mounting bracket, and a 13 plate oil cooler with fittings @ 8 3/4" centers.
Learn More -
Hyster Lift Truck tank set
Inlet Tank
This tank hasa 1 1/2" diameter hose connection, a stand pipe for a filler neck, four5/16" NC threaded nuts to attach the side frames, and a 1/4" NPT flangefor an expansion fitting.
Outlet Tank
This tank hasa 1 1/2" diameter hose connection, four 5/16" threaded nuts to attachthe side frames, and a 1/4" NPT flange for a drain cock. Learn More -
Solder-on cross flow tank set
Outlet Tank
This tank has a 1 1/2" diameter hose connection, and a 1 1/4" hole at the end of the tank for a filler neck.
Inlet Tank
This tank has only the 1 1/2" diameter hose connection.
Learn More -
Solder-on cross-flow tank set
Inlet Tank
This tank has a 1 3/4" diameter hose connection 2 5/8" from the edge of the tank to the center of the pipe, and a 1 1/4" hole on the end nearest the hose connection for a filler neck.
Outlet Tank
This tank has a 2 1/4" diameter hose connection 2 1/2" from the edge of the tank to the center of the pipe, and a 1/4" NPT flange on the bottom end of the tank for a drain fitting.
Learn More -
Lift Truck solder-on tank set
Inlet Tank
This tank has a 3/4" diameter hose connection, and a 1 1/4" diameter hole for a fill neck.
Outlet Tank
This tank has a 3/4" diameter hose connection.
Learn More -
Mine Cat solder-on tank set
Inlet Tank
This tank has a 1 1/4" diameter hose connection out of the end and on an angle towards the engine, a 1" diameter hose connection straight towards the engine, and a baffle that splits the tank in two.
Outlet Tank
This tank has a 1" diameter hose connection, a 1/4" NPT flange on each end for drain fittings, and a baffle that splits the tank in two.
This is a triple-pass system.
Learn More -
Lift Truck solder-on tank set
Outlet Tank
This tank has a 1 3/8" diameter hose connection, eight 5/16" NC threaded nuts for mounting, a mounting bracket on the back, and two clips.
Inlet Tank
This tank has a 1 3/8" diameter hose connection, six 5/16" threaded holes for mounting, a hole for a filler neck, two clips, a mounting bracket on the back, and two holes @ 10 3/4" centers to accommodate an oil cooler.
Header size is the same as tank set #102908A.
Learn More -
Forklift solder-on tank set
Filler Tank
This tank has a 1 3/4" diameter hose connection, holes @ 15 1/4" centers for an oil cooler, a stand pipe for a filler neck (part #1005), a mounting bracket, two clips, and three 5/16" NC threaded nuts to attach side frames.
Outlet Tank
This tank has a 1 3/4" diameter hose connection, a mounting bracket, two clips, two 5/16" NC threaded nuts to attach side frames, and a 1/4" NPT flange for a drain cock. Learn More