Inlet and Outlet Tanks
-
Orion Bus solder-on inlet/outlet tanks
The tanks have 2 1/2" diameter hose connections 7 1/2" in length, 1/4" NPT couplings for drain/expansion fittings, and ear on the top for mounting, and a bracket on the grill side of the tank with four 5/16" threaded holes.
Learn More -
Lift Truck solder-on tank set
Inlet Tank
This tank has a 1 1/2" diameter hose connection 6 1/4" from the top edge of the tank to the center of the pipe, and bends down on a 40o angle.
And a 1 3/8" diameter hose connection 2" from the top edge of the tank to the center of the pipe, and bends up at 90o.
Outlet Tank
This tank has a 1 3/4" diameter hose connection 2" from the bottom edge of the tank to the center of the pipe, a 1/4" NPT flange for a drain fitting, a 10 plate oil cooler with fittings spaced @12" (to be supplied by the customer.
Tank angles at the back and the sides at 45o angles.
Learn More -
Toyota solder-on tank set
Intlet Tank
This tank has a 1 3/8" diameter hose connection, eight 5/16" NC threaded nuts for mounting, a 1/4" NPT coupling for a drain cock, a mounting bracket on the back, and two clips.
Outlet Tank
This tank has a 1 3/8" diameter hose connection, six 5/16" NC threaded holes for mounting, a hole for a filler neck, two clips, a mounting bracket on the back, and holes @ 10 3/4" centers.
Learn More -
GMC solder-on tank set
Inlet Tank
This tank has a 2" diameter hose connection 2 1/2" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange for a drain fitting.
Outlet Tank
This tank has a 2" diameter hose connection 2 1/2" from the edge of the tank to the center of the hose connection, a 1/2" diameter pipe on the top of the tank, and a 3/4" NPT flange for a 5/8" diameter hose barb.
Learn More -
Forklift solder-on tank set
Intlet Tank
This tank has a 1 3/4" diameter hose connection, holes @15 1/4" centers for an oil cooler, a stand pipe for a filler neck (#1005), a mounting bracket, two clips, and three 5/16" NC threaded nuts to attach side frames.
Outlet Tank
This tank has a 1 3/4" diameter hose connection, holes @8" centers for an oil cooler, a mounting bracket, two clips, a 1/4" NPT flange for a drain fitting, and two 5/16" NC threaded nuts to attach side frames.
Learn More -
Lift Truck solder-on tank set
Inlet Tank
This tank has a 1 3/4" diameter hose connection, holes for an oil cooler @15 1/4" centers, a stand pipe for a filler neck (#1005), a mounting bracket, two clips, and three 5/16" NC threaded nuts to attach side frames.
Outlet Tank
This tank has a 1 3/4" diameter hose connection, a mounting bracket, two clips, two 5/16" NC threaded nuts to attach side frames, and a 1/4" NPT flange for a drain fitting.
Learn More -
Case solder-on tank set
Inlet Tank
This tank has a 2" diameter hose connection, a 1/2" NPT flange, and a 1/4" NPT flange.
Outlet Tank
This tank has a 2" diameter hose connection, and a 1/2" NPT flange.
Learn More -
Toyota Lift Truck tank set
Outlet Tank
This tank has akeyhole style bracket on the back for mounting, and a pipe toaccommodate a filler neck. There are three 5/16 NC nut for mountingside frames onto the tanks, a clip on each side of the tank, and a 11/4" hose connection 1 3/4" from the edge of the tank to the center ofthe hose connection.
Inlet Tank
This tank has four 5/16" nuts for mounting side frames to the tank,a keyhole style bracket on the back for mounting the tank, a 1/4" NPTflange to fit a drain cock, a clip on each side of the tank, and a 11/4" hose connection 2 3/4" from the edge of the tank to the center ofthe hose connection.
Learn More -
Forklift solder-on tank set
Filler Tank
This tank has a 1 3/4" diameter hose connection, holes @ 15 1/4" centers for an oil cooler, a stand pipe for a filler neck (part #1005), a mounting bracket, two clips, and three 5/16" NC threaded nuts to attach side frames.
Outlet Tank
This tank has a 1 3/4" diameter hose connection, a mounting bracket, two clips, two 5/16" NC threaded nuts to attach side frames, and a 1/4" NPT flange for a drain cock. Learn More -
Lift Truck solder-on tank set
Outlet Tank
This tank has a 1 3/8" diameter hose connection, eight 5/16" NC threaded nuts for mounting, a mounting bracket on the back, and two clips.
Inlet Tank
This tank has a 1 3/8" diameter hose connection, six 5/16" threaded holes for mounting, a hole for a filler neck, two clips, a mounting bracket on the back, and two holes @ 10 3/4" centers to accommodate an oil cooler.
Header size is the same as tank set #102908A.
Learn More