Bottom Tank
-
Solder-on Bottom Tank
This bottom tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain.
Learn More -
John Deere bottom tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on Bottom Tank
This bottom tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain.
Learn More -
Komatsu Loader solder-on tank
This tank has a bolt on style outlet flange, a 14 plate cooler with 19 1/2" centers, and a 14 plate cooler with 9 1/2" centers.
Note: Note: Please check water flange measurements, as to the centers of the 2 bolt holes, the dia. of the "big" hole and whether it is offset or in the center of the tank widthwise (5") way, there are at least 3 different flanges
Coolers must be provided by the customer.
Learn More -
Komatsu Loader solder-on tank
This tank has a bolt-on style flange on the bottom.
On the engine side there are two oil coolers with bolt-on style flanges - #1410PC (14 plates with fittings @ 10" centers)
#1418PC (14 plates with fittings @ 18" centers)
This tank can be provided as a blank channel, or with your old oil coolers RE/RE into the new tank, or as a new tank with new oil coolers.
Note: Please check water flange measurements, as to the centers of the 2 bolt holes, the dia. of the "big" hole and whether it is offset or in the center of the tank widthwise (5") way, there are at least 3 different flanges
Call for pricing and details.
Learn More -
Hyster Lift Truck bottom tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and in this case we used a 707PC in place of the original 1210PC plate oil cooler. Tank slopes at the grill side and at the sides.
Note: for this tank, a sample must be supplied by the customer.
Learn More -
Komatsu Loader solder-on bottom tank
This tank has a bolt-on style flange on the bottom, a 1" NPT coupling and a 1/2" NPT coupling on the bottom, and a 1" diameter bypass connection on the grill side that angles up at 90o and to the driver's side 45o.
On the engine side there are two oil coolers with bolt-on style flanges - #1410PC (14 plates with fittings @ 10" centers)
#1418PC (14 plates with fittings @ 18" centers)
This tank can be provided as a blank channel, or with your old oil coolers RE/RE into the new tank, or as a new tank with new oil coolers.
Note: Please check water flange measurements, as to the centers of the 2 bolt holes, the dia. of the "big" hole and whether it is offset or in the center of the tank widthwise (5") way, there are at least 3 different flanges
Call for pricing and details.
Learn More -
Hyster Lift Truck bottom tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, a channel along the back of the tank, and a 1012PC plate oil cooler (to be supplied by the customer).
Learn More -
Hyster Lift Truck solder-on bottom tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, a mounting stud in the center, and a 1218PC plate oil cooler.
Learn More -
Hyster Lift Truck solder-on bottom tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 10 plate oil cooler with the fittings spaced @ 12" center to center (to be provided by the customer).
Pairs with tank #012110A top tank.
Learn More