Solder on Tanks
-
Gen solder-on tank set
These tanks have 1 1/2" diameter hose connections, and a bracket with two holes on each end. The top tank has a 1 3/4" diameter hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Case Tractor solder-on complete set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1 3/4" diameter hole for a filler neck, and two 1/4" NPT flanges.
Bottom Tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a 3/8" NPT flange on the bottom for a second drain fitting.
Side Frames
These frames have four 3/8" NC threaded holes along each edge.
Learn More -
Solder-on side frame
This side frame is 43 1/8" long, with ten 5/16" threaded nuts along the back of the frame, and two 5/16" threaded nuts along the fan edge, and two along the grill edge.
Learn More -
Case Tank Set
Top Tank
This tank has a 1 3/4" diameter hose connection, a hole for a filler neck, a 1/4" NPT flange for a sensor, and four 5/16" NC threaded hex nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and four 5/16" NC threaded hex nuts to attach the side frames.
Learn More -
Case solder-on tank
This Case tank has a 1 5/8" diameter hose connection, and a 1/4" NPT flange.
Learn More -
Case solder-on bottom tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, a pair of 3/8" NC threaded studs @ 17 3/8" centers (offset towards the grill side), and mounting blocks on each end with two 5/16" threaded holes.
Learn More -
1918 Fire Truck solder-on top tank
This tank has a 2 1/2" diameter stand pipe for a filler neck, a threaded flange connection, four brackets with slotted holes to latch to the hood, and a PTO through-hole.
Learn More -
Lift Truck solder-on complete set
Right Side Tank
This tank has a 1 1/2" diameter hose connection, a 1 3/8" diameter hole for a filler neck, and a mounting bracket on the back.
Left Side Tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a mounting bracket on the back.
Learn More -
Liebherr solder-on tank
This tank has a 2 3/4" diameter hose connection 6" from the edge of the tank to the center of the hose connection.
Learn More -
Solder-on tank
This tank has a 1 1/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a keyhole bracket on the back of the tank for mounting.
Will need sample to manufacture Learn More