Solder on Tanks
-
Gen solder-on complete set
These tanks have 2" diameter hose connections and a 1/4" NPT flange. The top tank has a 1 3/4" diameter hole for a filler neck. The side frames have four 3/8" NC threaded holes along each edge.
Learn More -
Cat Loader solder-on
These tanks have 2" diameter hose connections and two 5/16" NC threaded holes on each end to bolt the side frames to. The top tank has hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
-
Case Loader solder-on top tank
This tank has a 2 1/4" hose connection 7 1/4" from the edge of the tank to the center of the hose connection.
Learn More -
Kubota solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection 6 7/8" from the edge of the tank to the center of the pipe, two 1/2" diameter mounting pins @21 1/2" centers, two 1/4" NC nuts on either side of the tank @14 1/4" centers, and a 1 1/4" diameter hole on the top for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection 5 5/8" from the edge of the tank to the center of the pipe, a 5/8" diameter hose connection 3 7/8" from the edge of the tank to the center of the pipe, two 1/2" diameter mounting pins @15 3/4" centers, two 1/4" NC nuts on either side of the tank @14 1/4" centers, and a PTO cutout in the middle of the tank.
Learn More -
Fork Lift solder-on tank
This tank has a 1 1/4" diameter hose connection, and a 1/4" NPT flange.
Learn More -
Case solder-on tank
This tank has a 1 1/2" diameter hose connection 6" from the edge of the tank to the center of the hose connection.
Learn More -
Case Tractor solder-on tank
This tank has a 2 1/4" diameter hose connection, a 1 3/8" diameter hole for a filler neck, a 1/4" NPT flange, a 1/8" NPT flange, and a bracket with two 1/4" NC threaded nuts.
Learn More -
-
Solder-on side frame
Learn More