Solder on Tanks
-
Stationary Unit solder-on tank set
These tanks have a 1 3/4" diameter hose connection. The top tank has a 1 1/4" diameter hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Komatsu bottom tank
This tank has a 2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and holes @ 19" centers for an oil cooler. Learn More -
Solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/8" diameter hose connection.
Learn More -
John Deere solder-on tank
This tank has a 1 1/2" diameter hose connection, and a stand pipe
for a filler neck.
Front and back view shown here.
Learn More -
Tree Harvester solder-on complete set
Top Tank
This tank has a 2" diameter hose connection, a hole for a filler neck, a 1/4" NPT flange, and a 3/4" NPT flange for a sight glass.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange.
Side Frames
These frames have a series of slotted holes along the edges.
Learn More -
Gen solder-on tank
This Gen tank has a 2" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, a hole at the top center of the tank to accommodate a passenger style filler neck, and a deflection baffle near the base of the tank. Learn More -
International solder-on tank
This tank has a 2 1/2" diameter hose connection 5 1/2" from the edge of the tank to the center of the hose connection, and a 1/4" NPT fitting on end for an expansion tube.
Learn More -
Volvo Loader solder-on tank
This tank has a 2 1/4" diameter hose connection, and a 14mm x 1.5mm flange for a drain assembly. The cross section of the tank is semi-circular.
Learn More -
-
Solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection 9 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT fitting to accommodate a vent 11 7/8 from the edge of the tank, and a 1 3/4" filler neck hole on the top center of the tank.
Bottom Tank
This tank has a 2 1/2" hose connection 3" long 6 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange on the grill side of the tank for a drain cock, and a pair of 1/2" NC @ 2" long mounting bolts at 25" centers.
Learn More