Solder on Tanks
-
Komatsu Loader solder-on tank
This tank has a bolt-on style flange on the bottom.
On the engine side there are two oil coolers with bolt-on style flanges - #1410PC (14 plates with fittings @ 10" centers)
#1418PC (14 plates with fittings @ 18" centers)
This tank can be provided as a blank channel, or with your old oil coolers RE/RE into the new tank, or as a new tank with new oil coolers.
Note: Please check water flange measurements, as to the centers of the 2 bolt holes, the dia. of the "big" hole and whether it is offset or in the center of the tank widthwise (5") way, there are at least 3 different flanges
Call for pricing and details.
Learn More -
Komatsu Loader solder-on tank
This tank has a bolt on style outlet flange, a 14 plate cooler with 19 1/2" centers, and a 14 plate cooler with 9 1/2" centers.
Note: Note: Please check water flange measurements, as to the centers of the 2 bolt holes, the dia. of the "big" hole and whether it is offset or in the center of the tank widthwise (5") way, there are at least 3 different flanges
Coolers must be provided by the customer.
Learn More -
Komatsu solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 3/8" NPT flange on the grill side, a 1 3/4" diameter hole on top for a filler neck, and a notch on either side of the tank. The inside of the tank contains a deflection baffle.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange, notches on either side of the tank, and a 10 plate oil cooler with 18" centers. Learn More -
Komatsu solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, 12" in from the edge of the tank to the center of the hose connection, a 3/8" NPT flange on the grill side, a notch on either side of the tank, a 1 3/4" diameter hole for a filler neck on top, and a deflection baffle.
Bottom Tank
This tank has a 2 1/4" diameter hose connection 6" in from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a drain fitting, a notch on either side of the tank, to accomodate a 16 plate oil cooler with fittings @18" centers.(to be supplied by customer)
Same bottom tank as set #101107A.
Learn More -
Komatsu solder-on bottom tank
This tank has a bolt-on flange 13 1/2" from the edge of the tank to the center of the hose connection. The flange has two 1/2" NC threaded holes @ 4 1/8" centers.
Learn More