Solder on Tanks
-
Komatsu solder-on bottom tank
This tank has a bolt-on flange 13 1/2" from the edge of the tank to the center of the hose connection. The flange has two 1/2" NC threaded holes @ 4 1/8" centers.
Learn More -
Komatsu solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, 12" in from the edge of the tank to the center of the hose connection, a 3/8" NPT flange on the grill side, a notch on either side of the tank, a 1 3/4" diameter hole for a filler neck on top, and a deflection baffle.
Bottom Tank
This tank has a 2 1/4" diameter hose connection 6" in from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a drain fitting, a notch on either side of the tank, to accomodate a 16 plate oil cooler with fittings @18" centers.(to be supplied by customer)
Same bottom tank as set #101107A.
Learn More -
Komatsu solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 3/8" NPT flange on the grill side, a 1 3/4" diameter hole on top for a filler neck, and a notch on either side of the tank. The inside of the tank contains a deflection baffle.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange, notches on either side of the tank, and a 10 plate oil cooler with 18" centers. Learn More -
Komatsu Loader solder-on tank
This tank has a bolt on style outlet flange, a 14 plate cooler with 19 1/2" centers, and a 14 plate cooler with 9 1/2" centers.
Note: Note: Please check water flange measurements, as to the centers of the 2 bolt holes, the dia. of the "big" hole and whether it is offset or in the center of the tank widthwise (5") way, there are at least 3 different flanges
Coolers must be provided by the customer.
Learn More -
Komatsu Loader solder-on tank
This tank has a bolt-on style flange on the bottom.
On the engine side there are two oil coolers with bolt-on style flanges - #1410PC (14 plates with fittings @ 10" centers)
#1418PC (14 plates with fittings @ 18" centers)
This tank can be provided as a blank channel, or with your old oil coolers RE/RE into the new tank, or as a new tank with new oil coolers.
Note: Please check water flange measurements, as to the centers of the 2 bolt holes, the dia. of the "big" hole and whether it is offset or in the center of the tank widthwise (5") way, there are at least 3 different flanges
Call for pricing and details.
Learn More -
Komatsu Loader solder-on bottom tank
This tank has a bolt-on style flange on the bottom, a 1" NPT coupling and a 1/2" NPT coupling on the bottom, and a 1" diameter bypass connection on the grill side that angles up at 90o and to the driver's side 45o.
On the engine side there are two oil coolers with bolt-on style flanges - #1410PC (14 plates with fittings @ 10" centers)
#1418PC (14 plates with fittings @ 18" centers)
This tank can be provided as a blank channel, or with your old oil coolers RE/RE into the new tank, or as a new tank with new oil coolers.
Note: Please check water flange measurements, as to the centers of the 2 bolt holes, the dia. of the "big" hole and whether it is offset or in the center of the tank widthwise (5") way, there are at least 3 different flanges
Call for pricing and details.
Learn More -
Komatsu solder-on bottom tank
This tank has a 18 plate oil cooler with fittings @ 19" centers (which must be supplied by the customer), a 2" diameter hose connection, a 1 1/4" diameter bypass hose, a 1/4" NPT flange, a 3/8" NPt flange on the bottom of the tank, an a notch on the side of the tank.
This tank goes with the top tank from #010810C
an 18" center 18 plate oil cooler can be provided, but the 3/4" NPT fittings will require adapters.
Or we can RE/RE your old cooler into the new tank.
Call for pricing and details.
Learn More -
Komatsu Dozer tank set
Top Tank
This tank has a 2" diameter hose connection, a 1/2" NC nut for a lifting lug, and a hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, two 1/2" NPT flanges for drain fittings, and a plate cooler to be supplied by the customer.
Note: a 1010PC plate cooler can be provided if necessary but the connections will be 3/4" NPT fittings instead of the bolt-on style flanges of the original. This will necessitate modification of the lines on the vehicle.
Or we can RE/RE your old cooler into the new tank.
Call for pricing and details.
Learn More -
Komatsu solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, four 1/4" NC threaded holes to attach side frames, two mounting pins @ 9 7/8" centers, and a hole on the top for a fill neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, four 1/4" NC threaded holes to attach side frames, two mounting pins @ 10 1/2" centers, a PTO cutout, and a 1/4" NPT flange on the grill side for a drain fitting.
Learn More -
Komatsu Loader bottom tank
This tank has a 2 1/4" diameter hose connection 2" from the edge of the tank to the center of the hose connection, a 3/8" diameter bypass connection 7" from the edge of the tank, and a 14 plate oil cooler 18 7/8" center to center ( if not supplied by the customer, a 18" center to center oil cooler can be used in it's place).
Note: original cooler has a Komatsu thread, the cooler that can be provided is equipped with 3/4" NPT thread, or we can RE/RE your old cooler into the new tank.
Call for pricing and details.
Learn More