Solder on Tanks
-
Case solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection, a 1/2" NPT flange for a sight glass, two mounting brackets, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, two mounting brackets, and a 1/4" NPT flange for a drain fitting.
Learn More -
Heater Core solder-on tanks
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 3/4" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on Top Tank
This tank has a 3/4" diameter bypass hose connection in the center of the tank, a pair of 1/2" NPT flanges for sight glasses on the right side of the tank, a 2 1/4" diameter hose connection below the baffle on the left side of the tank, a truck fill neck hole in the top center of the tank, and a 1/4" NPT flange between the fill neck hole and the left side of the tank. Learn More -
Bus solder-on tank set
These tanks have a 2 3/8" diameter hose connection. The top tank has a 1/4" NPT flange for an expansion fitting, and a 1/4" NC threaded hole on the end. The bottom tank has a 1/4" NC threaded hole on the end. Learn More -
Grader solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1 1/4" diameter hole for a filler neck, a 1/4" NPT flange, and an in-tank baffle.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and a 1/4" NPT flange for drainage.
Learn More -
JCB solder-on tank set
These tanks have 1 1/2" diameter hose connections and a mounting block on each end to attach side frames. The bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 6 1/4" from the edge of the tank to the center of the pipe, and two 1/4" NPT flanges (one on the engine side, and one on the grill side) 13 3/4" from the edge of the passenger-side of the tank to the center of the fitting.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 6 1/4" from the edge of the tank to the center of the pipe, a 1/4" NPT flange on the engine side for a drain fitting, and four 3/8" NC mounting bolts.
Learn More -
Motor Coach solder on complete set
Top Tank
This tank has two 2 1/4" diameter hose connections with a baffle separating them, a 1" NPT flange for a sight glass, a 1/4" NPT flange, and a mounting bracket.
Bottom Tank
This tank has a 1/4" NPT flange for a drain fitting, a 1418PC plate oil cooler (replaces the original aluminum cooler), and a mounting bracket.
Side Frames
These frames have eight 5/16" NC threaded nuts along the back.
Note: side frames have been modified from the original to be welded directly onto the tanks.
Learn More -
Case Tractor solder-on tank set
Top Tank
This tank has a hole for a filler neck, a 1/8" NPT fitting, two 1/4" NC threaded holes on the fan side, a 2 1/4" diameter hose connection, and four 5/16" NC threaded nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, four 5/16" NC threaded nuts to attach side frames, a 18mm x 1.5mm threaded boss for a sensor, and a 1/4" NPT flange for a drain fitting.
Learn More -
International Navistar solder-on tank set
This tank has a 3/8" NF threaded hole on one end, a mounting pin on each end, three 5/16" threaded blocks on the grill side, and a 1" diameter hose connection.
Note: these tanks are almost identical, with the only difference being the location of the mounting blocks.
Learn More