Solder on Tanks
-
Freightliner Solder-On tank set
These tanks have a 3" diameter hose connection 5 3/4" from the edge of the tank to the center of the hose connection (opposite ends for top or bottom tanks), and a 1/4" NPT flange for either a drain cock or an expansion fitting.
Note: this kit comes supplied with a 1/4" NPT x 3/8" hose barb, a 1/4" NPT drain cock, and eight 5/16" NC x 4 1/2" bolts with nuts.
Learn More -
John Deere Complete solder-on tank set
Top Tank
This tank has a 2" diameter hose connection 3" from the edge of the tank to the center of the hose connection, and a 1 3/8" diameter hole at the top of the tank for a fill neck.
Bottom Tank
This tank has a 2" diameter hose connection 7" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange for a drain cock.
Side Frames
These frames have three 3/8" NC threaded mounting nuts along the back of the frame, and eight 3/8" NC threaded mounting nuts along the fan/grill edge (three along one edge, and five along the opposite edge.
Learn More -
Forklift solder-on tank set
Top Tank
This tank has a 1 3/8" diameter hose connection, a 3/8" NPT flange for a low coolant sensor, a pipe for the filler neck, and two brackets for mounting side frames.
Bottom Tank
This tank has a 1 3/8" diameter hose connection, a 1/4" NPT fitting for a drain, two mounting studs, and two holes for an oil cooler. Learn More -
Solder-on complete tank set
These tanks have 2 1/2" diameter hose connections and a 1/4" NPT flange for expansion/drain fittings. The top tank has a hole for a filler neck and a mounting bracket on the engine side.
The side frames have four 1/4" NC threaded nuts along the edge, four 1/4" NC threaded nuts and four 3/8" NC threaded nuts on the back.
Learn More -
Cat Loader solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, two 5/16" NC threaded holes on each end to attach side frames, and a 1 1/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2" diameter hose connection, two 5/16" NC threaded holes on each end to attach side frames, and a 1/4" NPT flange for a drain fitting.
Learn More -
Gen Set solder-on complete set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 1 3/4" diameter hole for a filler neck, and a 1/2" NPT flange for a sight glass.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
These frames have four 5/16" NC threaded holes along the back, and two 5/16" NC threaded holes along each edge. Frames are 33" long.
Learn More -
Solder-on tank set
The top tank has a 1 1/4" diameter stand pipe for a filler neck, and a 1 1/2" diameter hose connection. The bottom tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for a drain. The side frames have three 5/16" NC weld nuts along each edge, and four 5/16" NC threaded nuts on the back.
Learn More -
John Deere 540B Skidder solder-on tank set
Top Tank
This tank has a 2" diameter hose connection, a 1 3/8" diameter hole for a filler neck, and a deflection baffle.
Bottom Tank
This tank has a 2" diameter hose connection, two holes for the oil cooler (one on the grill side and one on the fan side), and a 1/4" NPT flange for a drain fitting on the grill side.
Note: oil cooler must be supplied by the customer.
Learn More -
Cat / Case / John Deere solder on tank set
(both tanks are identical)
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the pipe, a 3/8" NPT coupling for a drain or expansion fitting, and two mounting bolt sleeves for 3/8" diameter bolts @16 5/8" centers. Learn More -
Cat / Case / John Deere solder on tank set
(both tanks are identical)
This tank has a 2 1/2" diameter hose connection 4" from the edge of the tank to the center of the pipe, a 3/8" NPT coupling for a drain or expansion fitting, and two mounting bolt sleeves for 3/8" diameter bolts @16 5/8" centers.
Learn More