Solder on Tanks
-
Gen Set solder-on tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Solder On tank set
Top Tank
This tank has a pair 1 1/2" diameter hose connections (2 1/2" long) 3 3/4" from the edge of the tank to the center of the hose connections, a 1" bypass hose (1 1/2" long) 9 7/8" from the edge of the tank, a pair of 1/4" NPT flanges 9" in from the edge of the tank (above and below each other), and a fill neck hole in the top center of the tank. This tank has a de-airation baffle.
Bottom Tank
This tank has a 2" diameter hose connection (2 1/2" long) 3 1/4" from the edge of the tank to the center of the hose connection, and a 1418PC plate oil cooler (14 plates, 18" centers) running from the other end.
Learn More -
Gen Set solder-on tank set
Top Tank
This tank has two 1 1/2" diameter hose connections, and a 2" diameter stand pipe for a fill neck.
Bottom Tank
This tank has a 2 1/2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Side Frames
These frames are 31" long, and have a bracket on the back with 3 slotted holes for mounting.
Learn More -
-
Solder-on tank
This tank has a 1 1/2" diameter hose connection, a 1/8" NPT flange, and a hole in the top center for a filler neck.
Learn More -
-
Solder-on bottom tank
This tank has a 1 1/2" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a PTO hole through the center of the tank.
Note: samples are required to build this tank.
Learn More -
Gen Set solder-on top tank
This tank has a 1 3/4" diameter hose connection, and a stand pipe for a fill neck.
Learn More -
Gen Set solder-on complete set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1 3/4" diameter hole for a filler neck.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, and a 1/2" NPT flange.
Side Frames
These frames are 27 1/2" high, and have three 5/16" NC threaded holes along the back.
Learn More