Solder on Tanks
-
Solder-on tank
This tank has a 1 1/2" diameter hose connection 2" long, which is 5 3/4" from the edge of the tank to the center of the hose connection, and a 1/2" NPT flange 6" in from the other end. It has a 1 5/8" hole on the top center of the tank to accommodate a fill neck. Learn More -
Toyota Lift Truck solder-on tank set
Outlet Tank
This tank has oil cooler holes 10 3/4" from center to center, akeyhole style bracket on the back for mounting, and a pipe toaccommodate a filler neck. There are three 5/16 NC nut for mountingside frames onto the tanks, a clip on each side of the tank, and a 11/4" hose connection 1 3/4" from the edge of the tank to the center ofthe hose connection.
Inlet Tank
This tank has four 5/16" nuts for mounting side frames to the tank,a keyhole style bracket on the back for mounting the tank, a 1/4" NPTflange to fit a drain cock, a clip on each side of the tank, and a 11/4" hose connection 2 3/4" from the edge of the tank to the center ofthe hose connection.
Learn More -
Lamborghini solder-on tank set
The top tank has a baffle between the pair of 1 3/8" diameter hose connections, two 24mm fittings for sensors, two 1/4" NC threaded holes on each side, a 1/4" NPT flange on the end for an expansion fitting, and a 3/8" NC threaded hole on each end for a drain.
The bottom is just a blank tank with a pair of 1/4" NC threaded holes on each side.
Learn More -
Nissan solder-on tank set
Top Tank
This tank has a 2 1/4" diameter hose connection, a 1 1/4" diameter hole for a filler neck, a 1/4" NPT flange for an expansion fitting, an 18mm flange for a sensor fitting, and a mounting block on each end to attach side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a drain fitting, and a mounting bracket on each end to attach side frames.
Learn More -
Case Loader solder-on tank set
These tanks have a 1 3/4" diameter hose connection, and the top tank has a 1 1/4" diameter hole for a filler neck.
Learn More -
Case Dozer tank set
Top Tank
This tank has a 2" diameter hose connection 9 1/4" from the edge of the tank to the center of the hose connection, a 1" diameter bypass connection 12 7/8" from the edge of the tank, a 1/4" NPT flange, and a hole on the top of the tank to accommodate a truck style filler neck 2" in from the edge of the tank to the center of the hole.
Bottom Tank
This tank has a 2" diameter hose connection 5" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange for a drain cock on the other side.
Learn More -
Solder-on side frame
This solder-together side frame has three 3/8" NC nuts along both the grill and fan edges for mounting the shroud/guard.
Learn More -
Mine Cat solder-on side frame
This frame has three 5/16" NC threaded holes and a 1/4" NC threaded hole along each edge.
These frames suit tank set #100108A. Learn More -
Solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Case tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a stand pipe for a filler neck, and four 5/16" NC threaded nuts to attach the side frames.
Bottom Tank
This tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for a drain cock, and four 5/16" threaded nuts to attach the side frames.
Learn More