Solder on Tanks
-
Case Tractor solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange for an expansion fitting, and four 5/16" NC threaded nuts to attach side frames.
Bottom Tank
This tank has 2 1/4" diameter hose connection, a 1" diameter bypass hose, a 1/4" NPT flange for a drain fitting on the grill side, and four 5/16" NC threaded nuts to attach side frames.
Learn More -
Hitachi solder-on bottom tank
This tank hs a 2 1/4" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, and a 3/8" NPT flange for a drain fitting.
Learn More -
Solder-on tank set
This tanks have 2" diameter hose connections, and the top tank has a 3/8" NPT flange and a 1 3/4" diameter hole for a filler neck.
Learn More -
Cat Lift Truck solder-on tank set
Inlet Tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT flange, and a mounting bracket.
Outlet Tank
This tank has a 1 1/2" diameter hose connection, a 1 3/8" diameter hole for a filler neck, a 1/4" NPT flange, and a mounting bracket, and a 13 plate oil cooler with fittings @ 8 3/4" centers.
Learn More -
Volvo Loader solder-on tank set
Top Tank
This tank has a 2" diameter hose connection.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on tank
This tank has a 1 3/4" diameter hose connection, a 1/4" NPT fitting, and a PTO cutout.
Learn More -
John Deere solder-on tank set
These tanks have 2 1/4" diameter hose connections. The top tank has a 1 1/4" diameter hole for a filler neck, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More -
Cat Fork Lift solder-on tank set
Top Tank
This tank has a 1 3/4" diameter hose connection, and a 1/4" NPT flange for an expansion fitting.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, two hoses to accommodate an oil cooler, and a 1/4" NPT flange for a drain fitting.
Learn More -
John Deere Loader
Top Tank
This tank has a 1 3/4" diameter hose connection 3" from the edge of the tank to the center of the hose connection, two "ears" for lifting the completed unit, and a 1 3/8" diameter hole on the top of the tank for the filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, a 5 plate 8" center oil cooler (to be provided by the customer), and a 1/4" NPT flange for a drain cock.
Learn More -
Heater Core complete tank set
These tanks have 3/4" diameter hose connections, and the bottom tank has a 1/4" NPT flange for a drain fitting.
Learn More