Solder on Tanks
-
Solder-on tank
This tank has a 2 1/4" diameter hose connection, a 1/2" NPT flange, a 1/4" NPT flange, and two holes for an oil cooler
Learn More -
Hyster Lift Truck solder-on top tank
This tank has a 1 1/2" diameter hose connection.
Pairs with tank #081707A.
Learn More -
Solder-on tank
This tank has a 1 3/4" diameter hose connection 2 1/2" from the edge of the tank to the center of the hose connection, two slotted holes for mounting, and a 1/4" NPT flange for a drain cock.
Learn More -
Solder-on tank
This tank has a 1 3/8" diameter hose connection, a 3/4" bypass pipe, and 3/8" NPT fitting for a drain.
Learn More -
Komatsu solder-on tank set
The top tank has a 2 1/4" diameter hose connection, a 1/4" NPT flange for an expansion plug, and a 1 3/4" diameter hole for a filler neck. The bottom tank has a bolt-on style flange.
Learn More -
Solder-on complete tank set
Top Tank
This tank has a 2" diameter hose connection, a de-airation baffle, a 1/4" NPT flange on the top of the tank for an expansion tube, a 1 3/8" hole for a filler neck, and a 3/4" diameter bypass connection.
Bottom Tank
This tank has a 2" diameter hose connection, and a 1/4" NPT flange for a drain cock.
Frames
These side frames are equipped with many various brackets for mounting.
Learn More -
Forklift solder on top tank
This tank has a 1 1/4" diameter hole for a filler neck, and a 1 3/8" diameter hole for a hose connection. Learn More -
Gen Set solder-on top tank
This tank has a 2 1/2" diameter hose connection, a hole for a filler neck, and two 1/4" NPT flanges.
Learn More -
Toyota Land Cruiser solder on kit
Top Tank
This tank has a 1 1/2" diameter hose connection, two 1/4" NC threaded nuts on the fan side, two 5/16" NC threaded nuts on each en to attach side frames. and a hole for a filler neck.
Bottom Tank
This tank has a 1 3/4" diameter hose connection, two clips, a 1/4" NPT flange for a drain fitting, and two 5/16" NC threaded nuts on each end to attach side frames.
Learn More -
Toyota Land Cruiser solder-on tank set
Top Tank
This tank has a 1 1/2" diameter hose connection, two 1/4" MC threaded nuts on the fan side, two 5/16" threaded holes on each end to attach side frames, and a hole for a filler neck.
Bottom Tank
This tank has a 1 1/2" diameter hose connection, two 5/16" NC threaded blocks on the fan side, a 1/4" NPT flange for a drain, two 5/16" threaded holes on each end to attach side frames, and two clips.
Learn More