Miscellaneous
-
Utility Tank
This tank has a 1/2" NPT drain fitting on the bottom of the tank, and four tabs to mount into the frame.
Learn More -
-
This Bus plate oil cooler core assembly inserts into a number of Bus oil cooler tanks with the header size of: 16 1/2" x 12 3/4" and 30 BH - including #082306C, #080608B, #080608C
The assembly contains three 16 plate oil coolers with 10" centers threaded @ 1 1/4" NPT, and a 1/4" NPT threaded hole to accommodate a drain.
Also has Nova Bus, and New Flyer Bus applications.
Important Information!
The transmission plate oil coolers that Taalman supply are intended for use in systems that operate at 80 PSI to 125 PSI typical operating pressure.
The coolers are leak tested to 300 PSI and are statically burst tested to 1000 PSI.
Please ensure that the intended use of the cooler meets the above requirements. Taalman will NOT be responsible for any damage caused by failure of a cooler that is exposed to anything outside of the above parameters.
Learn More -
This Bus plate oil cooler core assembly inserts into a number of Bus oil cooler tanks with the header size of: 13 1/2" x 10 1/4" and 26 BH - including #082306B, #080608A, #021309A, #031009A
The assembly contains two 16 plate oil coolers with 7" centers threaded @ 1 1/4" NPT, and a 1/4" NPT threaded hole to accommodate a drain.
Also has Nova Bus, and New Flyer Bus applications.
Important Information!
The transmission plate oil coolers that Taalman supply are intended for use in systems that operate at 80 PSI to 125 PSI typical operating pressure.
The coolers are leak tested to 300 PSI and are statically burst tested to 1000 PSI.
Please ensure that the intended use of the cooler meets the above requirements. Taalman will NOT be responsible for any damage caused by failure of a cooler that is exposed to anything outside of the above parameters.
Learn More -
Utility Tank
This tank has a 4 1/2" diameter hole on top with six 5/16" threaded holes, a 5" x 3 1/2" wide hole in the center of the rectangular bolt flange with 1/4" NC threaded holes, two mounting brackets on the bottom of the tank offset to one side for mounting the tank in place, and a drain pan with a 1/2" NPT fitting.
Learn More -
1946 Welland Tractor bottom tank
This tank has a 2 7/8" diameter hose connection, and a 1/4" NPT flange for a drain fitting.
Learn More -
Utility Tank
This tank has four mounting ears on the bottom, a 1/2" NPT flange on the top, a 3/4" NPT flange on the bottom, and a filler neck on the top.
Learn More -
Utility Tank
This tank has a 2" NPT nipple on the side of a filler neck, a 1/4" NPT fitting surrounded by a protection bracket for a sensor, a 5 bolt flange for a sending unit, two 1/2" NPT fittings, and two 3/8" NPT fittings for drains on the opposite side of the tank to the other fittings. Learn More -
Utility Tank
This tank has a 2" NPT threaded nipple for the filler, a 5 bolt flange for the sending unit, a block with a 1/8" NPT threaded hole and a 1/4" NPT threaded hole, and a 1/2" NPT drain fitting on the bottom. Learn More -
Utility Tank
Overall dimensions: 24 1/2" x 18" x 11"
One 3/4" NPT flange, one 1/8" NPT flange, and a filler neck. Learn More