Miscellaneous
-
Wabco filler neck
This filler neck installs into a 2 7/8" hole. It has a depth of 1 1/2" and an inside diameter of 2 5/16".
Learn More -
Solder on top and btm tanks for Gen Set - as per sample top tank hose conn. 2 1/2" dia, - 2 1/2" from end to center left side, a 3/4" threaded holes and two indents on each end of tank. Btm tank hose conn 2 1/2" dia. - 2 1/4" from end to center right side, 1/4" thread hole and two indents on each end of tank. NOTE: these tanks are not stock items, plastic tanks are "in house" that we reproduce in steel and solder dip. Learn More
-
Top and btm tanks as per sample Top tank hose conn. 2" dia., and 1/2" threaded holes, brackets on each end for rails. Btm tank hose conn. 2" dia., a 1/4" threaded hole with bypass tube pointing down on each side, brackets on each end for rails. NOTE: these tanks are not stock items, plastic tanks are "in house" that we reproduce in steel and solder dip. Learn More
-
Top and btm tanks as per sample Top tank hose conn. 2 1/2" dia. and 1/2" threaded holes, brackets on each end for side rails Btm tank hose conn. 2 1/2" dia. and 1/4" threaded hole with bypass tube pointing down on each side, brackets on each end for rails. NOTE: these tanks are not stock items, plastic tanks are "in house" that we reproduce in steel and solder dip. Learn More
-
Top and btm tank solder on Top tank hose conn. 2 1/4" dia., One 3/4" threaded hole and two indents at the top of tank on each side. Btm hose conn. 2 1/4" dia., One 1/4" threaded hole and two indents at the btm of tank on each side. NOTE: these tanks are not stock items, plastic tanks are "in house" that we reproduce in steel and solder dip. Learn More
-
Solder on top and btm tanks Top tank hose conn. 2 1/2" dia., 1/4" bypass tube, 2 slots on engine side @ 11" centered. Btm tank hose conn. 2 1/2" dia. and 1/2" bypass tube, oil cooler holes centered @ 19 3/4", 2 slots on engine side @ 9 3/4" centered and threaded holes on each end. NOTE: these tanks are not stock items, plastic tanks are "in house" that we reproduce in steel and solder dip. Learn More
-
Solder on top and btm tanks as per sample Top and btm tanks identical, hose conn. 2 1/2" dia, 1/4" NPT fitting 10 5/8" from right end to center, pins on each end @ 22 5/8" centered. NOTE: these tanks are not stock items, plastic tanks are "in house" that we reproduce in steel and solder dip. Learn More
-
NPT to SAE adapter
This adapter facilitates connecting newer style SAE lines to the traditional style NPT oil coolers.
3/4" NPT to 3/4" SAE 12
Learn More -
Mack mini bolt on tanks and rails HDR: 40 1/2" x 3 1/2" - 64BH, top hose connection is 2", 14 1/4" from end to center, btm is 2 1/2" 15" from end to center, pins are 2 1/2" center to center rails are 29" tall. complete with washer bars These are limited qty and have been discontinued, our solder on version is Taalman #2650CK steel Learn More
-
8 plate - 18" centers - 3/4" NPT fittings
Important Information!
The transmission plate oil coolers that Taalman supply are intended for use in systems that operate at 80 PSI to 125 PSI typical operating pressure.
The coolers are leak tested to 300 PSI and are statically burst tested to 1000 PSI.
Please ensure that the intended use of the cooler meets the above requirements. Taalman will NOT be responsible for any damage caused by failure of a cooler that is exposed to anything outside of the above parameters.
Learn More