Search results for 'peterbilt tanks'
-
Kenworth / Peterbilt solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 13" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a vent, and two mounting bosses at each end of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 12 7/8" from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank.
This set is supplied with eight 5/16" x 4 1/2" bolts with nuts, and a 90o hose barb for the vent.
Learn More -
Kenworth / Peterbilt solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 13" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a vent, and two mounting bosses at each end of the tank.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 12 7/8" from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank.
This set is supplied with eight 5/16" x 4 1/2" bolts with nuts, and a 90o hose barb for the vent.
Note: this tank set matches brass kit #9505.
NOTE: top tank hose connection is 3" from center of hose connection to btm of tank, if yours is 2" please refer to part #2717T, tanks are identical except for height of hc Learn More -
Peterbilt / Kenworth solder-on complete set
Top Tank
This tank has a 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a barb fitting, and two mounting pins.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 5 3/4" from the edge of the tank to the center of the hose connection and pointing towards the ground, and two mounting pins.
Side Frames
These frames are 35 3/4" long, with two indentations with holes in the center. These frames are interchangeable.
Learn More -
Peterbilt / Kenworth solder-on tank set
Top Tank
This tank has a 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, a 1/4" NPT flange for a barb fitting, and two mounting pins.
Bottom Tank
This tank has a 2 1/2" diameter hose connection 5 3/4" from the edge of the tank to the center of the hose connection and pointing towards the ground, and two mounting pins. Learn More -
Peterbilt solder-on tank set
Both of these tanks are identical. Each has a 2 1/2" hose connection 4" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange for either a drain cock or a vent.
This tank set comes with a 1/4" NPT drain cock, and a 1/4" NPT x 3/8" hose barb.
Learn More -
Peterbilt
Top Tank
This tank has a 2 1/2" diameter hose connection 8 1/2" from the edge of the tank to the center of the hose connection, and a 1/4" NPT flange to accommodate a barb fitting.
Bottom Tank
This tank has a 2 1/2" hose connection 4" from the edge of the tank to the center of the hose connection, and 1/4" NPT flange to accommodate a drain cock.
Learn More -
Peterbilt solder-on tank set
Top and bottom tanks both have 2 1/2" diameter hose connections, the top connection is in the center of the tank, and the bottom connection is 4" from the end of tank to center of the hose connection. Each has a 1/4" NPT flange for a drain/expansion fitting.
Similar to brass version #9504 (HDR: 25 3/4" x 3").
Learn More -
Ford solder-on tank set
These tanks are identical. They have 2" diameter hose connections, and a 1/4" NPT flange for a drain/expansion fitting.
Matching brass kit #9019.
Individual brass tank #3041.
Learn More -
Mack solder-on complete set
Brass Kit N/A;CUC # N/A;Steel Kit #2660CT ;Model N/A;Header Size: 22 5/16" x 3 5/16"; rails are 35 13/16" long Learn More -
Mack solder-on complete set
Brass Kit N/A;CUC # N/A;Steel Kit #2660C ;Model N/A;Header Size: 22 5/16" x 3 5/16", rails are 30 7/16" long Learn More
Recently Viewed Products
My Quote
You have no items in your quote.