Search results for 'bottom tank 26.5 x5.5'
-
Kenworth top tankThis tank has a 2 1/2" diameter hose connection on the passenger's side, three 1/4" NPT flanges facing the engine, a bracketon top, a hole for filler neck on top front corner, and the driver's side of the tank is cut lower to accommodate an airto air cooler hose.
Learn More
-
Kenworth bottom tankThis tank has a flange in the top center of the tank with four 3/8" NCthreaded holes, a flange on the side with two 5/16"NC threaded holes, and two 5/8" NF mounting holes @8" centers.
Learn More
-
Kenworth bottom tankThis tank is the same as tank #600 except there are no bottommounting holes. The tank tapers more on ends for boltclearance for mounting brackets.
Learn More
-
Kenworth bottom tankThis tank has a flange at the center of the tank with four bolts with 3/8" NC threads, and a flange on the side of the tank with two bolts with3/8" NC threads.
Learn More
-
Kenworth bottom tankThis tank has a bolt-on type flange with two 1/2" NC threadedholes in the middle of the tank, two bolt-on type flanges onthe the grill side with two 5/16" NC threaded holes in each, two bolt-on type flanges on the engine side with two7/16" NC threaded holes in each, and two 5/8" NFthreaded mounting holes @ 8" centers.
Learn More
-
Kenworth bottom tankOne flange on bottom with four 3/8" NC threads.Two flanges on side with two 3/8" NC threads ineach. Two 5/8" NC threaded mounts at 16" centers.Tank is tapered on ends and is shallow in centerbetween mounts.
Learn More
-
Kenworth bottom tank
This tank has a 3 1/2" diameter hose connection, two bolt-on type connections with two 7/16" NC holes in each, a bolt-on type connection on the grill side with two 3/8" NC holes, and two 5/8" NF mounting holes @ 16" centers.
Learn More
-
Kenworth bottom tankThis shallow tank is 1 1/2" deep from end to end. There is a3" diameter hose connection on the passenger side that angles slightly downward at an angle of approximately 10
o.
Note: before ordering this tank, compare your sample with tank #608, as these tanks are similar in appearance and can be easily mistaken for each other. Learn More
-
Kenworth bottom tankThis tank steps down on each end to accommodatemounting brackets. There is a 2 1/4" diameter hose connectionon the drivers side bent on a 90
o angle topassengers side, and a 1/4" NPT flange on the bottom.
Learn More
-
Kenworth bottom tankThis tank has a 3" diameter hose connection on the passenger sidethat slants slightly downwards at an angle of approximately 10
o. This hose connection is 6" long.
If a shorter hose connection is required, compare your sample with tank #6081, which has a hose connection of only 4" long. Learn More