Search results for '20 1/4"'
-
International blank brass header
Header size: 29 1/8" x 3"
Learn More
-
Ford blank brass header
Header size: 26 1/4" x 3 1/4"
Learn More
-
Ford blank brass headerHeader size: 28 1/4" x 2 3/4"
Original OEM header size: 28 1/2" x 3"
Learn More
-
Mack Advance bottom tankThis tank has two mounting plates with a 5/8" NC threaded hole in the center, a 1" diameter hose connection that runs along the front of the tank, a 1 1/4" diameter hose connection, and two 1/4" NPT drain flanges. A baffle divides the tank across the width.
Learn More
-
Mack Advance top tankThis top tank has an angle bracket on the top of the tank with 6 holes, a 1" hose connection in the center of the tank, two 1/4" NPT fittings, a 1/2" NPT fitting on the back for a sight glass, a hole for filler neck on the top of the tank, a 1" NPT access for a check valve, and a 3/4" NPT fitting for a fill bypass.
Learn More
-
GMC bottom tankThis tank has a baffle that runs along the length of the tank down the middle, a 1" and a 1 1/4" diameter hose connection, and a 1/4" NPT flange near the 1" hose connection.
Note: the 1 1/4" diameter hose connection runs to the far side of the baffle. Learn More
-
GMC bottom tankThis tank has a 1 1/4" diameter hose connection on the passenger side coming straight out, a 1" diameter hose connection on driver side on a 90
o angle facing towards the center of the tank, two 1/4' NPT flanges, a baffle in the center of the tank, and two mounting nuts with 1/2" NC threads @ 8" centers.
Learn More
-
GMC bottom tankThis one-pass low flow tank has a 1 1/4" diameter hose connection coming straight out from passenger side facing the engine, a 1/4" NPT fitting next to the pipe, and a mounting bracket with two 1/2" NC threaded nuts @ 8" centers.
Learn More
-
GMC top tankThis low flow top tank comes complete with checkvalve. There are twenty five 5/16" NC threaded holes in the built inbaffle, a 1" diameter hose connection straight downfrom the baffle on passenger side, two 1/2" NPT andone 1/8" NPT flange facing the engine, a bolt-on typeflange on top of the tank to access the check valve. The top frontcorners of the tank are cut lower and there are two rounded cut-outs across topof tank, and a 1 1/4" diameter hole for filler neck ontop passenger side corner.
Learn More
-
Bus Top FrameThis frame has eight 3/8" NC threaded holes along each edge of the frame.
Note: matches tank #7433, #753, and #754. Learn More